Description
ICS TRIPLEX TC-215-01-4M5 Trusted TMR I/O Interconnection Cable
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ICS TRIPLEX |
| Part Number | TC-215-01-4M5 |
| Product Family | Trusted |
| System Architecture | Trusted TMR |
| Product Type | I/O / Interconnection Cable Assembly |
| Cable Length | 4.5 m configuration |
| Construction | Shielded / multi-shielded |
| Termination | Factory-assembled connectors |
| Application | Internal Trusted system interconnection |
| Signal Role | I/O and associated system wiring |
| Installation | Cabinet/system wiring |
| Electronic Function | None — passive cable assembly |
| Typical Environment | Industrial control / safety-system cabinets |
Available product documentation describes TC-215-01-4M5 as a 4.5 m multi-shielded I/O connection cable for the ICS TRIPLEX Trusted architecture. Another source describes it as a factory-assembled shielded interconnection cable used between chassis, interface adapters, and field termination assemblies.
Product Introduction
The ICS TRIPLEX TC-215-01-4M5 is a system-specific cable assembly used within the Trusted TMR safety-system wiring architecture. Its purpose is physical signal interconnection rather than logic execution, signal conditioning, or network processing. The cable is supplied as a factory-assembled unit, making the complete assembly—including its connectors and internal wiring—part of the replacement specification.
The 4M5 configuration corresponds to the approximately 4.5 m cable length used where the cabinet layout requires additional distance between the associated Trusted hardware and termination/interface point. A 6.5 m TC-215-01 variant is also listed, so the length suffix should be treated as an important procurement parameter rather than an incidental designation.
TC-205-02-8M5
Application Scenarios & Field Pitfalls — Engineer’s Perspective
TC-215-01-4M5 is relevant to Trusted TMR cabinet wiring and I/O interconnection, particularly maintenance work where an existing factory-terminated cable needs to be replaced without modifying the installed system architecture.
Typical Applications
- Trusted TMR I/O wiring — provides the physical connection required by the applicable I/O and termination arrangement.
- Cabinet interconnection — used where Trusted chassis or interface hardware must connect to associated termination equipment.
- Legacy system maintenance — replacement of damaged or degraded factory-assembled cable harnesses.
- Safety-system refurbishment — useful when maintaining an existing Trusted installation while retaining its original wiring architecture.
Field Pitfalls
Do not treat the cable as an electronic module. TC-215-01-4M5 does not contain a processor, I/O circuitry, or Ethernet controller. Listings calling it a digital input module or communication card are not reliable descriptions.
Do not substitute based on length alone. The Trusted cable family contains several visually similar assemblies, including TC-201, TC-301, TC-303, and TC-305 variants. Their system functions are different even when their length codes look similar.
Check the complete termination arrangement. Because this is a factory-assembled cable, connector type, keying, conductor allocation, shielding, and endpoint configuration all matter. A field-fabricated cable of similar length is not automatically an acceptable replacement.
Verify the 4M5 suffix. The same TC-215-01 family is also listed with a 6M5 configuration. The wrong length can create routing, bend-radius, or connector-strain problems inside a crowded Trusted cabinet.
Related Products
- TC-215-01-6M5 — same TC-215-01 cable family with a longer 6.5 m configuration.
- TC-201-01-4M5 — related Trusted I/O cable family; different cable designation and should not be assumed interchangeable.
- TC-201-01-6M5 — longer TC-201-01 configuration.
- TC-301-02-2M0 — Trusted local expansion cable with a different system function.
- TC-303-01-2M0 — Trusted remote expansion cable associated with the T8314/T8310 architecture.
- TC-305-01-5M0 — Trusted communications cable associated with the T8151 communications interface.
- T8100 — Trusted Controller Chassis.
- T8110B / T8110C — Trusted TMR processor family.
- T8310 — Trusted Expander Processor.
- T8151B — Trusted Communications Interface.
The related-part references show that the TC-series contains several different cable families for I/O, local expansion, remote expansion, and communications. They should therefore be selected by system function and endpoint hardware, not by the cable length or connector appearance alone.
Procurement Note
For TC-215-01-4M5, specify the complete part number rather than simply requesting a “Trusted I/O cable.” The key verification points are:
- TC-215-01 cable family
- 4M5 length configuration
- Existing Trusted chassis/interface hardware
- Connector and keying arrangement
- Shielding and factory termination
- Existing cabinet wiring documentation
I would specifically reject supplier descriptions that identify TC-215-01-4M5 as a 220 VAC module, Ethernet communication card, digital input module, or expander processor. Those descriptions conflict with the available cable-family evidence.
For a safety-system replacement, the safest procurement practice is to match the complete cable part number and both physical terminations against the installed assembly before approving the spare.
