Description
Product Overview
The GUTOR 0P2406 is an interface board associated with the internal control and fuse-status circuitry of industrial UPS equipment. Its purpose is to provide an interface between designated fuse-related circuits and the UPS control architecture, helping the system identify relevant fault conditions. A GUTOR PDW spare-parts list identifies this component as an interface fuse board for a 110 VDC UPS. The related 0P2406A is cataloged as an XXW interface board for 110/125 VDC installations.
Voltage configuration is an important selection criterion for this product family. GUTOR parts lists distinguish the 0P2406A for 110/125 VDC systems, the 0P2405A for 220 VDC systems, and the 0P2407A for 400 VDC systems. These designations indicate different system configurations; a similar physical layout does not establish electrical interchangeability.
Before ordering, verify whether the required component is marked 0P2406 or 0P2406A, and compare it with the installed board and the UPS-specific bill of materials. Published descriptions differ on the fuse-channel arrangement, so confirm terminal assignments and monitored circuits using the applicable wiring diagram. For critical UPS equipment, also request evidence of functional testing and inspect the board for damaged connectors, corrosion, and heat discoloration.
Product Introduction
The GUTOR 0P2406 interface/fuse board is a system-specific spare for compatible industrial UPS equipment. It supports the interface between designated fuse-status circuits and the UPS control system. Its exact function and wiring depend on the particular UPS design and board variant.
For replacement planning, use the complete part number, system DC voltage, board revision, and original terminal layout as the primary matching criteria. Do not assume that the 0P2405A, 0P2406A, or 0P2407A can substitute for one another; confirm compatibility against the manufacturer’s documentation.
Key Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | GUTOR / Schneider Electric |
| Model | 0P2406 |
| Related variant | 0P2406A |
| Product type | UPS interface / fuse board |
| Equipment family | GUTOR XXW; related PEW/PDW systems |
| DC system voltage | 110 VDC for a documented 0P2406 installation; 110/125 VDC for the 0P2406A variant |
| Primary function | Interface for fuse-status monitoring circuits |
| Fuse-channel arrangement | Must be confirmed; available listings differ |
| Control interface | UPS-specific internal wiring; detailed electrical interface not independently verified |
| Communication protocol | Not independently verified |
| Input current / power consumption | Not independently verified |
| Operating temperature | Not independently verified |
| Protection rating | Not independently verified |
| Installation method | Internal UPS assembly; verify chassis and mounting arrangement |
| Product condition | Confirm actual condition with supplier |
The model and system-voltage information comes from GUTOR spare-parts listings. Obtain the relevant UPS manual and wiring diagram before using this table as an installation specification.
0P2406
Related Products
| Model | Description |
|---|---|
| 0P2405 / 0P2405A | XXW interface board for 220 VDC systems |
| 0P2406A | XXW interface board for 110/125 VDC systems |
| 0P2407A | XXW interface board for 400 VDC systems |
| 0P0285 | Internal UPS power-supply PCB for 110/125 VDC input |
| 0P0284 | Internal UPS power-supply PCB for 220 VDC input |
These components appear in GUTOR spare-parts references but have different functions or voltage configurations. They are related parts for identification purposes, not confirmed substitutes for the 0P2406.
Frequently Asked Questions
Q1: What is the GUTOR 0P2406 used for?
It is listed as an interface/fuse board for compatible GUTOR industrial UPS equipment. A specific PDW spare-parts list identifies it as an interface fuse board in a 110 VDC system.
Q2: Is the 0P2406 compatible with 110/125 VDC systems?
The related 0P2406A is explicitly cataloged as an XXW interface board for 110/125 VDC systems. Verify whether your installed component is the base 0P2406 or the 0P2406A variant before ordering.
Q3: What is the difference between 0P2405A, 0P2406A, and 0P2407A?
The spare-parts listings associate these variants with 220 VDC, 110/125 VDC, and 400 VDC systems, respectively. Do not interchange them without explicit confirmation from the equipment documentation.
Q4: Does the board monitor 12 fuse channels?
One secondary listing describes T1–T12 monitoring, while a GUTOR PDW spare-parts list describes the 0P2406 as being without T1–T12. The exact channel arrangement therefore needs to be confirmed from the installed board and the correct wiring diagram.
Q5: Is the 0P2406 a power-supply board?
The available parts lists identify it as an interface/fuse board, not as the internal low-voltage power-supply assembly. GUTOR uses separate part numbers, such as 0P0285, for the 110/125 VDC-input power-supply PCB.
Q6: What should procurement verify before purchasing?
Check the complete part number and suffix, UPS model and serial number, nominal DC system voltage, board markings, connector layout, and documented functional test results. Resolve the T1–T12 configuration discrepancy before approving the component for installation.
Q7: Can the board be replaced while the UPS is running?
Do not assume hot-swap support. Follow the UPS manufacturer’s maintenance procedure, isolate the relevant circuits, and account for stored energy and the potential impact on fault monitoring before removing or installing the board.
