Description
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | B&R |
| Model | 0GH-AT610 |
| Product category | Module housing / case |
| Compatible module | 2AT610.6 |
| System family | B&R System 2005 |
| Electrical function | None independently specified |
| Signal channels | Not applicable to the housing itself |
| Communication protocol | Not applicable |
| Power requirement | No independent power requirement specified |
| Mounting arrangement | Confirm from the original 2AT610.6 assembly |
| Dimensions | Not confirmed |
| Weight | Approximately 0.4 kg reported by a secondary listing; verify |
| Lifecycle | Reported discontinued by manufacturer |
Identification clarification: The 0GH-AT610 is the case for the B&R 2AT610.6 temperature module. It should not be described as a standalone digital I/O module or controller. The electrical specifications belong to the 2AT610.6, not the enclosure.
Product Introduction
The B&R 0GH-AT610 is an enclosure component associated with the 2AT610.6 temperature input module in the B&R System 2005 platform. It is a mechanical replacement part, not an independently operating PLC module, analog input channel, or communication interface.
For maintenance teams, identifying this component correctly matters when an existing temperature module has damaged or missing housing parts. Confirm the enclosure configuration against the original assembly before ordering, especially when the installed equipment has undergone previous repairs.
0GH-AT610
Application Scenarios & Field Pitfalls (Engineer’s Perspective)
A damaged module case can expose circuit boards and connectors to mechanical contact, contamination, and handling damage. However, replacing the enclosure does not repair an electrical fault in the underlying temperature input module. The first task is to establish whether the required spare is the housing or the complete 2AT610.6 assembly.
Typical application scenarios include:
- Temperature measurement cabinets: Housing replacement for installed B&R 2AT610.6 modules.
- Industrial process equipment: Mechanical maintenance of System 2005 temperature input assemblies.
- Manufacturing control panels: Replacement of damaged or missing module enclosure components.
- Legacy PLC maintenance: Retaining the original I/O architecture when only the housing requires replacement.
Field pitfalls
1. Do not confuse the enclosure with the complete module. The 0GH-AT610 is identified as a case for the 2AT610.6. If the temperature measurement channels are faulty, replacing the housing alone will not resolve the electrical problem.
2. Check mechanical compatibility. Compare the original housing, mounting features, connector openings, and module revision. Do not assume that a visually similar B&R enclosure will fit the 2AT610.6 correctly.
3. Protect the exposed electronics during replacement. Isolate the equipment according to site procedures before removing the module. Use appropriate ESD precautions and inspect the circuit board and connector contacts before transferring the assembly into the replacement case.
For incoming inspection, request photographs of all sides of the enclosure, its internal mounting features, and the identification label. Since the part is reported discontinued, verify that the supplied item is the correct original housing rather than a complete module or an unrelated 0GH-series accessory.
Related Products
- 2AT610.6 — B&R temperature input module associated with the 0GH-AT610 enclosure. This is the principal compatibility reference.
- 0GH-AT600 — B&R System 2005 module designation; verify its specific function and housing requirements before considering it for the same assembly.
- 0GH-AT660 — Separate B&R 0GH-series product; not established as a direct substitute for 0GH-AT610.
- 0GH-AI300 — B&R analog input module in the 0GH product family.
- 0GH-AO350 — B&R analog output module in the 0GH product family.
- 0GH-DI426 — B&R digital input module in the 0GH product family.
- 0GH-DO428 — B&R digital output module in the 0GH product family.
The 2AT610.6 is the confirmed associated module. The other models are family-level references only; their enclosures and electrical compatibility should not be assumed.
Procurement and quality-control note: Specify B&R 0GH- and explicitly state that the required item is the enclosure for 2AT610.6. Confirm whether the requirement is for the empty case or a complete temperature input assembly. Do not accept electrical specifications for the 2AT610.6 as specifications of the housing itself.
