Description
Product Overview
The ABB PP885M 3BSE069280R1 is an industrial operator interface designed for applications requiring graphical process visualization and touchscreen control. As part of the Panel 800 Version 6 family, it can display machine status, process values, alarms, trends, and operator controls when configured with a compatible HMI application. Its 15.4-inch widescreen display provides a 1280 × 800 resolution, while the resistive touchscreen supports operation in industrial environments where operators may use gloves or a stylus.
The panel uses a 1.0 GHz Intel Atom processor, 1 GB of RAM, and approximately 3.5 GB of application storage. For system integration, it provides two Ethernet interfaces with different speeds, along with serial communication through RS-232 and isolated RS-422/485. The available interfaces can support communication with compatible controllers and industrial equipment, but the actual protocol, driver, and connection arrangement depend on the application developed in Panel Builder 800.
For replacement projects, the full order number 3BSE069280R1 is essential. The PP885M is the black-panel variant with 450 cd/m² brightness; the visually related PP885H has a higher-brightness display and a different part number. Before ordering, check the panel cutout, mounting depth, supply voltage, serial interface requirements, and installed HMI project version. A replacement panel may require the original application project and compatible configuration software to restore the existing operator screens and communication settings.
Product Introduction
A failed HMI can interrupt operator visibility even when the underlying controller remains operational. The ABB PP885M 3BSE069280R1 provides a 15.4-inch touchscreen interface for compatible Panel 800 Version 6 applications, with Ethernet and serial connectivity for industrial control systems.
Before replacing an installed panel, verify the cutout dimensions, 24 VDC supply, communication wiring, and HMI project compatibility. Confirm that the application backup is available rather than assuming the replacement will contain the original screens and controller connections.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | PP885M |
| Order Number | 3BSE069280R1 |
| Product Family | Panel 800 Version 6 |
| Product Type | Industrial HMI touch panel |
| Display | 15.4-inch TFT color LCD |
| Resolution | 1280 × 800 pixels |
| Aspect Ratio | 16:10 |
| Brightness | 450 cd/m² |
| Touch Technology | Resistive |
| Processor | Intel Atom, 1.0 GHz |
| Main Memory | 1 GB RAM |
| Application Memory | 3.5 GB SLC flash |
| Ethernet | 1 × 10/100 Base-T; 1 × 10/100/1000 Base-T |
| Serial Ports | 1 × RS-232; 1 × isolated RS-422/485 |
| USB | 3 × USB 2.0 host |
| Power Supply | 24 VDC, 18–32 VDC |
| Power Consumption | Approximately 28–31.2 W, depending on operating condition |
| Overall Dimensions (W × H × D) | 410 × 286 × 83 mm |
| Panel Cutout (W × H) | 394 × 270 mm |
| Front/Rear Protection | IP66 / IP20 |
| Configuration Software | Panel Builder 800 Version 6 |
Specifications are based on ABB’s Panel 800 Version 6 data sheet and PP885M hardware and installation documentation.
PP885M 3BSE069280R1
Related Products
- ABB PP885 — 3BSE069276R1: Standard high-performance 15.4-inch Panel 800 touch panel. It is a related model, not automatically an interchangeable replacement.
- ABB PP885H — 3BSE069281R1: 15.4-inch black touch panel with 1000 cd/m² brightness, intended for applications requiring greater display brightness.
- ABB PP874M — 3BSE069279R1: 7-inch black touch panel with 800 × 480 resolution. Its size and cutout differ from PP885M.
- ABB PP885R — 3BSE069296R1: Rugged 15.4-inch Panel 800 variant intended for demanding environments. Verify mounting and environmental requirements before substitution.
- ABB RX885/893 touch cover: Protective accessory recommended for compatible Panel 800 panels. Confirm the exact cover and installation requirements for the installed unit.
Frequently Asked Questions
Q1. What is the ABB 3BSE069280R1 used for?
It is a 15.4-inch industrial HMI panel used to display process information and provide operator interaction with compatible automation systems.
Q2. What software is used to configure the ?
ABB specifies Panel Builder 800 Version 6 for this model. Confirm the exact software version and project compatibility before migrating an existing application.
Q3. Can PP885H replace ?
Not automatically. The PP885H has a 1000 cd/m² high-brightness display, compared with 450 cd/m² for the , and carries a different order number. Verify mounting, configuration, and application compatibility before substitution.
Q4. Does a replacement panel retain the original HMI application?
Do not assume so. Confirm whether the supplied unit contains the required project and runtime configuration. Keep a verified application backup before replacing the installed panel.
Q5. What power supply does the require?
The documented supply is 24 VDC, with an operating range of 18–32 VDC. Check the supply polarity, wiring, and panel label before energizing the unit.
Q6. Is the front of the panel suitable for washdown exposure?
ABB specifies IP66 front protection and IP20 rear protection. The installed panel cutout, gasket, and enclosure condition must also meet the intended environmental requirements.
Q7. What should be checked before procurement?
Confirm the full order number, screen condition, touchscreen response, Ethernet and serial interfaces, mounting dimensions, power-up test results, and availability of the required HMI project.
Procurement recommendation: Specify ABB 3BSE069280R1 and verify that the replacement matches the existing panel cutout, interface requirements, and Panel Builder 800 application. A successful power-on test alone does not confirm that the original HMI application and controller communications will work.
