Description
Product Overview
The GUTOR 0P0284 is an internal power-supply board used in legacy industrial uninterruptible power supply equipment. Its purpose is to convert the system’s DC supply into the lower-voltage rails required by internal electronic assemblies. Spare-parts records list a 220 V DC input and outputs including +20 V DC, ±12 V DC, and +5 V DC. These rails support the electronics within the designated UPS configuration; they should not be confused with the UPS’s main AC output to protected loads.
In a legacy GUTOR UPS, the correct internal supply assembly matters because the voltage rails, connectors, mechanical arrangement, and power capacity must match the original system design. A board that appears similar may have a different input voltage or output arrangement. Before procurement, confirm the UPS model and serial number, the installed board’s full part number, and any board-level identification printed on the PCB. The reference 0500160 appears in spare-parts documentation associated with 0P0284, but should be verified against the actual unit.
For maintenance planning, treat this as a system-specific spare rather than a universal 220 V DC power supply. Verify the connector pinout, output loading, mounting arrangement, and required startup checks against the original service documentation. If the UPS is supporting critical loads, replacement and testing should be carried out by qualified personnel under the approved maintenance procedure, with the appropriate bypass and isolation arrangements established.
Product Introduction
The GUTOR 0P0284 provides internal DC power for compatible legacy GUTOR UPS electronics. Its role is to supply the low-voltage circuits used by the UPS control and power-conversion assemblies. The exact installation and electrical configuration must be confirmed for the particular UPS model.
When sourcing a replacement, match the complete 0P0284 designation and compare the PCB markings, connectors, and output specifications with the removed assembly. Do not substitute a similarly numbered control board or a generic power supply without engineering approval.
Key Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | GUTOR / Schneider Electric |
| Model | 0P0284 |
| Product type | Internal PCB power-supply assembly |
| Product application | GUTOR industrial UPS systems |
| Input voltage | 220 V DC, per published spare-parts records |
| Output voltages | +20 V DC, +12 V DC, −12 V DC, and +5 V DC, per published records |
| PCB / assembly reference | 0500160 reported in GUTOR parts listings |
| Main function | Supplies internal low-voltage electronics |
| UPS family compatibility | Confirm exact UPS model and assembly revision |
| Output current ratings | Not independently verified |
| Output power rating | Not independently verified |
| Connector pinout | Not independently verified |
| Protection rating | Not independently verified |
| Operating temperature | Not independently verified |
| Installation method | Internal UPS assembly; follow the applicable service manual |
| Product condition | Confirm actual condition with supplier |
The voltage details above come from equipment spare-parts records. Output current limits, total power capacity, and exact system compatibility should be established from the original technical documentation before installation.
0P0284
Related Products
The following components appear in GUTOR UPS spare-parts documentation or are associated with the same equipment ecosystem. They serve different functions and are not automatic substitutes for 0P0284.
| Model | Function |
|---|---|
| 0P0280 | AC-input PCB power-supply assembly |
| 0P1922A | Parallel-operation controller PCB |
| 0P1923A | PCA alarm controller |
| 0P2405A | Front-panel assembly |
| 0P2438 | Control PCB for a specific UPS power-conversion configuration |
These references appear in GUTOR catalog or equipment spare-parts information. Confirm the relevant UPS model and bill of materials before ordering related parts.
Frequently Asked Questions
Q1: What is the GUTOR 0P0284 used for?
It is an internal PCB power-supply assembly for compatible GUTOR industrial UPS systems. It supplies lower-voltage DC rails for internal electronics.
Q2: What is the input voltage?
Spare-parts records identify a 220 V DC input. Verify the actual board label and UPS service documentation before applying power.
Q3: What output voltages does it provide?
Published records list +20 V DC, ±12 V DC, and +5 V DC. The current rating for each rail has not been independently verified and should be checked against the original technical documentation.
Q4: Is 0P0284 a complete UPS module?
The available parts records identify it as a complete PCB power-supply assembly used inside UPS equipment, not as a complete standalone UPS system.
Q5: Can 0P0280 replace 0P0284?
Do not assume so. The parts listings distinguish 0P0280 as an AC-input supply assembly and 0P0284 as a 220 V DC supply assembly. Their input requirements differ, so replacement requires explicit confirmation from the equipment documentation.
Q6: What should be verified before ordering?
Confirm the exact part number, board markings, input voltage, output rails, connector layout, and compatibility with the installed GUTOR UPS. Request clear photographs of both sides of the PCB and documented functional test results, especially for refurbished or surplus stock.
Q7: Can the board be replaced while the UPS is operating?
Do not assume it is hot-swappable. Internal power-supply replacement can expose personnel to hazardous stored energy and may interrupt control functions. Follow the manufacturer’s isolation procedure and the site’s approved UPS maintenance plan.
