Description
Product Overview
The Emerson KJ3007X1-EA1 is a dedicated terminal-block assembly for PROFIBUS DP connectivity in DeltaV control systems. It provides the physical wiring interface associated with a compatible PROFIBUS DP card, allowing the fieldbus network to be terminated at the control-system cabinet. Its role is distinct from that of the communication card itself: the terminal block provides the connection point, while the card performs the network communication functions.
For maintenance engineers, the key issue is correct matching between the terminal block, the installed communication card, and the field wiring. PROFIBUS DP installations are sensitive to network topology, cable termination, shielding, and grounding. A replacement terminal block should therefore be checked for the correct part number and connector arrangement before existing wiring is transferred. A physical fit alone is not enough to establish compatibility.
When purchasing the KJ3007X1-EA1, verify the identification label and inspect the terminal connections for damaged screws, corrosion, heat discoloration, or cracked insulation. Confirm whether the existing installation uses the original terminal-block arrangement and whether any network-specific termination components are fitted. Published listings identify a 5 VDC, 100 mA rating, but the applicable Emerson documentation should govern electrical checks and installation.
Product Introduction
The Emerson KJ3007X1-EA1 is a DeltaV PROFIBUS DP terminal block intended to simplify field wiring for compatible PROFIBUS communication hardware. It is a connection and termination component, not a standalone fieldbus controller.
For replacement work, confirm the communication-card model, terminal-block revision, wiring layout, and network termination arrangement. Listings indicate that the part has been discontinued by the manufacturer, so legacy-system buyers should pay particular attention to the actual condition, provenance, and test evidence of available stock.
Key Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Emerson Process Management |
| Model | KJ3007X1-EA1 |
| Product type | PROFIBUS DP terminal block |
| System family | DeltaV DCS |
| Primary function | PROFIBUS DP card wiring termination |
| Communication standard | PROFIBUS DP |
| Supply rating | 5 VDC, as listed by component suppliers |
| Maximum current | 100 mA, as listed by component suppliers |
| Mounting | DeltaV control-system terminal-block arrangement; confirm hardware revision |
| Environmental rating | Confirm against the applicable Emerson documentation |
| Operating temperature | Exact limits not independently verified for this specific part |
| Protection rating | Not independently verified |
| Manufacturer lifecycle status | Listed as discontinued by component resellers; confirm with Emerson |
| Condition | Confirm actual condition with supplier |
The electrical values and lifecycle note above come from component listings rather than a verified current manufacturer datasheet. Use the original technical documentation for final installation and acceptance criteria.
KJ3007X1-EA1
KJ3007X1-EA1
Related Products
These are related DeltaV communication or wiring components, not confirmed direct replacements for the KJ3007X1-EA1.
Emerson KJ3008X1-BA1 — Sequence of Events Terminal Block
A terminal-block accessory associated with the DeltaV Sequence of Events card. Its application differs from PROFIBUS DP wiring.
Emerson KJ3009X1-BA1 — DeviceNet Card
A related DeltaV fieldbus component for DeviceNet applications, not a substitute for a PROFIBUS terminal block.
Emerson KJ3243X1-BB1 — PROFIBUS DP Series 2 Plus Card
A DeltaV PROFIBUS DP communication-card model. Confirm the terminal-block pairing from the relevant system documentation.
Emerson KJ4001X1-CA1 — I/O Terminal Block
A different DeltaV terminal-block component used for I/O wiring. It is listed for family reference only; do not assume electrical or mechanical interchangeability.
Frequently Asked Questions
Q1: What is the Emerson KJ3007X1-EA1 used for?
It provides wiring terminations for a compatible DeltaV PROFIBUS DP communication card. It is a terminal-block accessory, not the PROFIBUS master or controller itself.
Q2: What voltage does the use?
Component listings specify 5 VDC at up to 100 mA. Confirm these values against the applicable Emerson documentation and installed configuration before electrical work.
Q3: Is the a PROFIBUS communication card?
No. It is the terminal block associated with the wiring interface for a PROFIBUS DP card. The communication card performs the fieldbus interface functions.
Q4: Can it be replaced with another DeltaV terminal block?
Not without verification. Different DeltaV terminal blocks serve different communication or I/O functions. Check the exact part number, mating card, connector layout, and wiring requirements.
Q5: Is the discontinued?
Component-reseller listings report it as discontinued by the manufacturer. Confirm lifecycle status and approved replacement options with Emerson for the specific installed system.
Q6: What should be checked when buying used stock?
Inspect the label and terminals, verify the exact model, and request photographs of the actual part. If possible, obtain evidence of continuity checks, physical inspection, and confirmation that the terminal block matches the intended PROFIBUS card.
Q7: Does replacing the terminal block require checking the PROFIBUS network?
Yes. After replacement, verify wiring polarity, shielding, grounding, cable termination, and network diagnostics according to the site procedure. A terminal-block replacement can introduce connection faults even when the communication card itself is functioning normally.
