Description
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 8V1010.00-2 |
| Manufacturer | B&R |
| Product family | ACOPOS |
| Product type | Servo drive |
| Rated output power | 0.45 kW |
| Continuous output current | 1.0 A RMS |
| Peak output current | 2.8 A RMS |
| Mains input voltage | 3 × 400–480 VAC ±10% |
| Alternative mains voltage | 3 × 230 VAC ±10% |
| Input frequency | 50/60 Hz ±4% |
| Maximum installed load | 1.35 kVA |
| Auxiliary supply | 24 VDC (+25% / −20%) |
| Maximum auxiliary current | 1.47 A plus motor holding-brake current |
| Switching frequency | 5, 10, or 20 kHz |
| Maximum output frequency | 598 Hz |
| DC bus capacitance | 165 µF |
| Plug-in module slots | 3 |
| Integrated line filter | Category C3 |
| Integrated braking resistor | Yes |
| Electronic safe-restart inhibit | Yes |
| Protection rating | IP20 |
| Operating temperature | 5 to 40°C nominal; 55°C maximum |
| Dimensions | 58.5 × 257 × 220 mm |
| Weight | 2.5 kg |
Source: B&R official technical data.
Product Introduction
The B&R 8V1010.00-2 ACOPOS servo drive is intended for controlled motor operation in automated machinery and industrial positioning systems. Its 0.45 kW rated output and 1.0 A continuous current capacity make it suitable for smaller servo axes where accurate speed, torque, and position control are required. Integrated power components reduce the need for separate external line-filter and braking-resistor assemblies.
8V1010.00-2
The modular architecture provides three slots for optional communication and feedback modules. Supported interface options include CAN, POWERLINK V2, resolver, EnDat, HIPERFACE, BiSS, and incremental/SSI encoder interfaces. The installed module configuration determines the available motor-feedback and controller communication connections. A replacement drive should therefore be checked against the original hardware configuration rather than selected by base model number alone.
Application Scenarios & Field Pitfalls
Typical applications
- Servo positioning axes in automated machinery.
- Packaging and material-handling equipment.
- CNC and machine-tool motion systems.
- Industrial assembly and indexing equipment.
- Multi-axis systems using B&R ACOPOS drives.
Field pitfalls
- Motor sizing: The continuous output rating is 1.0 A RMS, with a 2.8 A RMS peak rating. Verify the motor’s rated and peak current requirements before substitution.
- Feedback interface: Check whether the installed system uses a resolver, EnDat, HIPERFACE, BiSS, or incremental encoder. The required plug-in interface module must be present.
- Power configuration: Confirm the three-phase mains supply and separate 24 VDC auxiliary supply. Do not confuse the 24 VDC control supply with the main drive input.
- Thermal derating: At 480 VAC and 20 kHz switching frequency, continuous current must be reduced above 45°C. Installation altitude above 500 m also affects current capacity.
Related Products
| Model | Description | Relationship |
|---|---|---|
| 8V1016.00-2 | 0.7 kW, 1.6 A ACOPOS servo drive | Higher-rated family member |
| 8V1010.001-2 | 0.45 kW coated-board version | Related hardware variant |
| 8V1010.50-2 | 0.45 kW, lower-voltage supply variant | Different power configuration |
| 8AC114.60-2 | POWERLINK V2 interface module | Optional communication module |
| 8AC122.60-3 | Resolver interface module | Optional feedback module |
| 8AC126.60-1 | EnDat 2.2 encoder interface | Optional feedback module |
| 8AC130.60-1 | Configurable digital I/O module | Optional I/O expansion |
These are documented ACOPOS family products and accessories. They should not be treated as automatic replacements without checking the electrical and interface configuration.
Procurement and Quality-Control Notes
Before purchasing, verify:
- Exact part number: 8V1010.00-2.
- B&R ID code: 0x18D6.
- Installed plug-in communication and feedback modules.
- Mains and 24 VDC auxiliary power terminals.
- Cooling openings and internal contamination.
- Braking resistor condition.
- Safe-restart inhibit function.
- Motor output-stage and feedback operation.
Documentation status: B&R provides official technical data and Automation Studio hardware upgrades, including a V6.0 hardware upgrade dated April 22, 2026. This confirms continued documentation availability, not necessarily current production or unrestricted technical support.
Procurement recommendation: Prioritize an exact 8V1010.00-2 match with the original plug-in modules. Request a documented power-stage test and verify operation with the intended motor and feedback system before commissioning.
