Description
Product overview
The ABB GFD563A101 3BHE046836R0101 is a specialized interface component identified for LCI converter applications. A load-commutated inverter is used in high-power conversion systems where controlled power transfer depends on coordinated converter operation and system conditions. Within such equipment, interface modules provide the connections needed for signals and control exchanges between converter-related hardware and the wider control architecture.
Correct identification is particularly important when maintaining legacy power-electronics installations. Although third-party listings describe this part as an excitation controller, processor module, or Ethernet interface, those descriptions are not consistent. The ABB catalog designation, LCI Converter Interface (LIN), is the more defensible product classification. Specific claims about CPU architecture, control-cycle time, communication protocols, or protection functions should not be published as confirmed specifications without supporting documentation.
For replacement procurement, match the complete order number and type designation against the installed module. Check the converter model, hardware revision, connector layout, wiring drawings, and applicable control-system documentation before approving a substitute. If sourcing a used or surplus unit, request photographs of the actual assembly and a test report that identifies exactly what was tested. In a converter-control system, a visually intact board or a successful power-up test does not establish full functional compatibility.
Product introduction
The ABB GFD563A101 is listed as an LCI converter interface for specialized industrial power-electronics applications. Its exact role within a particular installation should be confirmed from the converter documentation and module identification labels.
For maintenance teams, the priority is to match the complete part number, connector arrangement, and hardware revision. Confirm functional test coverage before installing a replacement in critical converter equipment.
Key technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | GFD563A101 |
| Type designation | GF D563 A101 |
| Order number | 3BHE046836R0101 |
| Catalog description | LCI Converter Interface (LIN) |
| Product category | Converter interface module |
| Application | LCI-based power-electronics equipment |
| Control platform | Confirm from the target system documentation |
| Supply voltage | Not independently verified |
| Power consumption | Not independently verified |
| Communication interfaces | Confirm from the hardware manual |
| Connector arrangement | Verify against the original module |
| I/O channel count | Not verified |
| Control-cycle time | Not verified |
| Operating temperature | Not verified |
| Protection rating | Not verified |
| Mounting arrangement | Confirm from the installed equipment |
| Hardware revision | Verify nameplate and board markings |
| Replacement status | Confirm current availability with the supplier |
| Unit condition | Verify whether new, unused surplus, refurbished, or used |
ABB’s catalog designation supports the product identification, but it does not establish the detailed electrical ratings listed above.
GFD563A101 3BHE046836R0101
Related products
For replacement planning, focus on the equipment surrounding the module rather than assuming that similar model numbers are interchangeable.
- ABB GFD563A102 — a related designation appears in supplier listings, but interchangeability with GFD563A101 is not established.
- ABB LCI converter system components — verify the required interface and control modules from the original system bill of materials.
- ABB excitation and power-electronics control components — use only where the system documentation confirms the intended function and hardware compatibility.
Frequently asked questions
Q1: What is the ABB GFD563A101 used for?
The available ABB-designation catalog identifies it as an LCI converter interface (LIN). Confirm the exact role in the target converter system using the applicable manual.
Q2: Is it an Ethernet port module?
Some supplier listings use that description, but the catalog designation identifies an LCI converter interface. Do not assume it is a standalone Ethernet module without confirming the hardware documentation.
Q3: Is GFD563A101 an excitation controller?
Some third-party sellers describe it that way. The more specific catalog designation available identifies it as an LCI converter interface, so its exact control responsibilities should be verified for the installed system.
Q4: Can GFD563A102 replace ?
Do not assume so. Confirm the complete ABB order number, hardware revision, and approved interchangeability information before substitution.
Q5: What should a supplier provide for a used unit?
Request clear nameplate and connector photographs, condition and repair history, and test results. The report should identify the test setup and whether functional operation was verified beyond basic power-up.
Q6: What should be checked before installation?
Verify the target converter, control-system configuration, hardware revision, connector pinout, wiring, and any required configuration or commissioning steps. Follow the site’s approved electrical safety and commissioning procedures.
Procurement recommendation
For ABB 3BHE046836R0101, use the catalog designation LCI Converter Interface (LIN) as the starting product description, and avoid unsupported claims about processor architecture, network protocols, voltage ratings, or protection functions.
Before purchase, request:
- A clear photograph of the module label showing the complete order number.
- Confirmation of hardware revision and supplied condition.
- The target converter model or equipment application for which the unit is suitable.
- Documentation of inspection and functional testing.
- Written confirmation of return terms if the module fails compatibility checks.
For critical power-electronics equipment, exact identification and verified system compatibility matter more than a generic claim that the module is “compatible with ABB systems.”
