Description
Product Overview
The ABB 3BHE044249R6003, identified by the designation GDC806C6003, is a product-specific electronic board associated with ABB industrial power-conversion equipment. The GDC806 family designation points toward drive-related control hardware, but the exact electrical characteristics, supported drive models, and board-level functions for the R6003/C6003 version require confirmation against the corresponding ABB documentation. For maintenance engineers, that distinction matters: circuit boards with similar model prefixes may serve different hardware revisions or occupy different positions within a power-conversion assembly.
In a drive system, control and interface boards can form part of the signal path between control electronics and power-stage components. Depending on the actual board configuration, this role may involve control-signal handling, interface functions, or coordination with associated drive hardware. The ABB 3BHE044249R6003 should therefore be selected by its complete part number rather than by the GDC806 prefix alone. Confirm the drive family, assembly designation, connector layout, board revision, and applicable wiring or service documentation before installation. The available references identify related GDC806 boards as ABB drive-interface or control hardware, but do not independently establish the detailed specifications of GDC806C6003.
For procurement and plant maintenance, the ABB 3BHE044249R6003 GDC806C6003 is best evaluated as a model-specific replacement component. Before commissioning, inspect the board for connector damage, contamination, corrosion, and signs of previous repair. Compare its identification labels and physical layout with the removed unit, then follow the equipment manufacturer’s approved replacement and startup procedures. Do not assume that a visually similar board can be substituted without checking its hardware revision and intended application. Where the drive controls high-power machinery, an incorrect board selection can cause startup failure, control faults, or equipment downtime.
Product Introduction (Non-Templated)
A drive-board replacement can become a lengthy troubleshooting exercise when the replacement part has the wrong revision or connector arrangement. The ABB 3BHE044249R6003 GDC806C6003 is associated with ABB industrial drive hardware, but its exact supported assembly should be confirmed before procurement.
For a legacy drive repair, match the complete part number and board identification against the installed component. Confirming the hardware before installation helps prevent avoidable rework; no compatibility or startup-time guarantee should be made without application-specific verification.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Product Model | GDC806C6003 |
| ABB Part Number | 3BHE044249R6003 |
| Product Category | Industrial drive electronic board |
| Product Family | GDC806 |
| Primary Application | ABB power-conversion / drive equipment; exact assembly to be confirmed |
| Board Function | Specific control or interface function not independently verified |
| Electrical Supply | Requires confirmation from the matching technical documentation |
| Communication Interface | Not verified for this exact variant |
| Connector Configuration | Verify against the original board and equipment drawings |
| Compatible Drive Models | Confirm using the equipment type designation and ABB parts documentation |
| Firmware Requirements | Verify applicable hardware and firmware revisions |
| Installation Method | Internal equipment or drive-assembly installation, subject to confirmation |
| Operating Temperature | Not verified for this exact part number |
| Protection Rating | Not verified; depends on the installed assembly and enclosure |
| Condition | New surplus subject to individual inspection and stock confirmation |
Technical verification note: The available references identify related part number 3BHE044249R0003 / GDC806C0003 as ABB drive-interface or control hardware. They do not establish that the R6003/C6003 variant shares its electrical specifications, functions, or compatibility.
3BHE044249R6003 GDC806C6003
Related Products
The following are related identification points and product families for technical comparison. They should not be treated as confirmed direct substitutes without checking the original drive assembly documentation.
1. ABB 3BHE044249R0003 / GDC806C0003 — A related GDC806 board designation associated with ABB drive-interface hardware. Compare the full suffix, revision, connectors, and application before considering substitution.
2. ABB 3BHE041294R0103 / GDC806C103 — A separately listed GDC806-designated component. Its precise relationship to GDC806C6003 requires documentation; a shared family prefix alone does not establish compatibility.
3. ABB 3BHE039426R0101 — An ABB power-electronics-related spare part associated with drive control or gate-drive applications. Confirm its specific assembly role before comparing it with the target board.
4. ABB 3BHE039724R0C3D — A separate ABB power-conversion control component. Its application and interfaces must be checked independently; it is not established as a replacement for .
5. ABB 3BHE043536R0001 — An ABB component associated with an IGCT gate-drive unit. It belongs to related power-electronics equipment but has a different product designation and should not be presumed interchangeable.
6. ABB 3BHE048062R0101 — An ABB control-interface board identified in industrial drive-system spare-part listings. Its intended drive family and interface requirements should be verified before use in the same maintenance project.
7. ABB 3BHL000511P0003 / NTAC-02 — An encoder-interface module associated with ABB drive equipment. It serves a different interface purpose and is relevant when troubleshooting speed-feedback or encoder-interface issues, not as a direct replacement.
Frequently Asked Questions (FAQ)
1. What is the ABB 3BHE044249R6003 used for?
It is identified as an ABB industrial electronic board associated with drive or power-conversion hardware. The precise control function and supported equipment models should be confirmed using the matching technical documentation. Do not assume that it is a general-purpose PLC or DCS controller.
2. Can I replace with GDC806C0003?
Not without written compatibility confirmation. The two designations have different suffixes, and the associated ABB part numbers differ: 3BHE044249R6003 versus 3BHE044249R0003. Similar numbering does not establish matching circuitry, firmware requirements, connectors, or supported equipment. Compare the original board markings and the drive’s parts list before authorizing a replacement.
3. How can I verify compatibility with my existing ABB drive?
Use this verification sequence:
- Record the drive’s complete model and serial identification.
- Photograph the removed board’s part number, suffix, revision, and connectors.
- Compare those details with the proposed replacement.
- Verify the applicable assembly drawing and service documentation.
- Confirm any commissioning, parameter, or firmware requirements before startup.
If the original board is unavailable for inspection, use the equipment identification and documented spare-parts list to establish the correct replacement.
4. Does the ABB support a specific firmware version?
The firmware compatibility of this exact variant has not been established by the available references. The answer depends on the drive platform, installed control hardware, and applicable software release. Obtain confirmation of the required revision before installing the board in a production-critical drive.
5. Will replacing the board erase my existing drive parameters?
Do not assume that replacing a circuit board will preserve every setting. Parameter retention depends on where the drive stores its configuration and on the function of the component being replaced.
Before maintenance, back up the drive parameters through the supported procedure, document existing fault codes, and record relevant hardware and software revisions. After replacement, verify the configuration and complete the manufacturer’s required commissioning checks.
6. How should I inspect a new-surplus ABB 3BHE044249R6003 before installation?
Request photographs of the actual board, including its labels, connectors, component side, and packaging. Confirm the full part number and inspect for corrosion, damaged pins, contamination, and visible repair work. Ask for a written condition declaration and test report where available.
New surplus does not necessarily mean factory sealed or functionally tested. Those are separate claims and should be documented independently.
7. What warranty and testing should I request for this ABB drive board?
Confirm the warranty period and exclusions in writing before purchase. For a critical drive application, request a record of the inspection performed, identification of the test equipment or procedure used, and disclosure of any limitations.
A visual inspection cannot establish electrical functionality under load. Where operational testing is required, verify that the test method is suitable for the actual board and its intended drive assembly.
