Description
Technical Specifications
| Parameter | Details |
|---|---|
| Product Model | ADV569-P00 |
| Manufacturer | Yokogawa Electric |
| Product Series | ADV569 |
| Product Type | Digital output module |
| Compatible System | ST7-compatible CENTUM I/O |
| Output Channels | 64 |
| Output Signal | Transistor contact |
| Maximum Output Voltage | 30 VDC |
| Maximum Output Current | 100 mA per channel |
| Output Response Time | 16 ms or less |
| Pulse Width Range | 8 ms to 7200 s |
| Pulse Width Resolution | 8 ms |
| Signal Isolation | Common negative side every 16 channels |
| Maximum Current Consumption | 800 mA at 5 VDC |
| External Connection | Dedicated KS9 cable |
| Module Weight | Approximately 0.3 kg |
| Output Protection | External spark-suppression diode recommended for DC relay loads |
Specifications are based on Yokogawa’s ADV569 product documentation. The 64-channel configuration applies to the standard ST7-compatible ADV569; certain RIO upgrade variants have different channel limitations.
Product Introduction
Yokogawa ADV569-P00 Digital Output Module Overview
The Yokogawa ADV569-P00 is a 64-channel transistor output module designed for compatible ST7 field connections. It provides isolated output groups, with a common negative connection shared by each group of 16 channels. The transistor outputs support DC loads up to 30 V and 100 mA per channel, making the module suitable for interfacing with compatible control relays and discrete field devices.
ADV569-P00
The -P suffix identifies the pulse-width and time-proportional output functionality. Configurable pulse durations from 8 milliseconds to 7200 seconds allow the module to support timed switching applications as well as ordinary ON/OFF control. Correct ST7 compatibility, KS9 cable selection, and output-load matching are essential when replacing an installed unit.
Application Scenarios & Field Pitfalls
The -P00 is intended for distributed control applications where multiple discrete outputs must be operated from a compatible Yokogawa field I/O arrangement. Its pulse-width and time-proportional functions can support timed control sequences, while its transistor outputs provide switching signals to compatible DC loads.
Potential application areas
- CENTUM control-system discrete output interfaces.
- Industrial relay and solenoid control within specified DC load limits.
- Timed switching and pulse-width output applications.
- Process equipment requiring multiple isolated groups of digital outputs.
Engineer checks before replacement
- Confirm ST7 compatibility. The is designed for ST7-compatible connections. Do not assume it can directly replace an output module from another Yokogawa I/O generation.
- Check the common-negative arrangement. Isolation is grouped every 16 channels, not independently for all 64 channels. Verify field wiring and common-terminal assignments.
- Respect output ratings. Each output is rated for up to 30 VDC and 100 mA. Loads exceeding these limits require an appropriate external interface.
- Protect inductive loads. Yokogawa specifies a spark-suppression diode when driving DC relays. Omitting suitable suppression can damage output circuitry.
- Verify pulse configuration. Confirm pulse duration, timing resolution, ON/OFF delay, and time-proportional settings in the control application before commissioning.
- Match the connection cable. The module uses a dedicated KS9 cable. Verify cable type and terminal arrangement rather than relying on connector appearance.
Related Products
The following Yokogawa modules are useful references when reviewing ST-compatible I/O configurations. Their signal directions, channel arrangements, or suffix options differ.
- ADV169-P00 — 64-channel digital input module for compatible ST6 connections. It handles field input acquisition rather than digital output switching.
- ADV869-P00 — 32-channel input and 32-channel output module for compatible ST5 connections. It combines both signal directions but uses a different system generation.
- ADV169-P01 — output module with the ISA Standard G3 option. The added environmental option must be checked against the installed system requirements.
- ADV169-PM00 — RIO system-upgrade version of the family. Its channel availability and connection arrangement differ from the standard 64-channel -P00.
- ADV169-PK00 — Another RIO upgrade configuration. Confirm its terminal and cable requirements before considering it for an existing ST7 installation.
Procurement recommendation: Specify the complete -P00 model, not just . Request photographs of the module label and connector side, and verify the KS9 cable, ST7 compatibility, and pulse-output configuration. The suffix is important because the basic type, G3 option, and RIO upgrade variants are not interchangeable by assumption.
