Description
Woodward 8923-1061 — L-Series Serial Communication Kit
Product Overview
The Woodward 8923-1061 is a serial communication accessory for compatible Woodward L-Series position controllers. Its purpose is to provide the physical communication connection needed for service and configuration work, allowing a computer running the appropriate L-Series Service Tool to communicate with the controller. Unlike a position controller or actuator, this part does not independently regulate actuator position. It supports the maintenance workflow required to access the controller’s settings, observe operating information, and carry out authorized adjustments.
During commissioning or fault diagnosis, access to controller parameters can help technicians distinguish a configuration problem from a mechanical or electrical fault. The 8923-1061 communication harness is therefore useful when setting up an L-Series controller, checking its configured values, or performing service work on an existing installation. The exact connection arrangement and supported controller versions should be checked against Woodward documentation. In particular, the harness should not be assumed to work with every Woodward controller simply because another product also uses serial communication.
For maintenance departments, Woodward 8923-1061 is best treated as a dedicated service accessory whose compatibility depends on the controller model, firmware, computer interface, and Service Tool version. Some documented service-tool packages list this harness separately from the 9927-1222 software tool, so confirm whether the purchase includes the cable alone or a complete service package. When sourcing replacement stock, inspect the connectors and cable condition and verify the exact part number. A physically similar serial cable may have different wiring or pin assignments, which can prevent communication or create avoidable service delays.
Product Introduction (Non-Templated)
When an L-Series position controller needs configuration or diagnostics, the service connection matters just as much as the software. Woodward 8923-1061 is a serial communication harness used to connect compatible L-Series control hardware to a computer-based service workflow.
Before ordering, confirm the controller’s firmware compatibility, the required Service Tool version, and the contents of the supplied kit. Do not substitute a generic serial cable without verifying its pinout and electrical interface.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Woodward |
| Part Number | 8923-1061 |
| Product Name | L-Series Serial Communication Kit |
| Product Type | Serial communication harness / service accessory |
| Compatible Product Family | Woodward L-Series position controllers |
| Primary Function | Controller communication for service and configuration |
| Service Functions | Configure, adjust, monitor, and troubleshoot compatible controllers |
| Communication Method | Serial connection |
| PC Software | Compatible Woodward L-Series Service Tool |
| Associated Service Tool Part Number | 9927-1222 is listed in some service-tool packages; verify package revision |
| Supported Firmware | Depends on the controller firmware and applicable Service Tool version |
| Connector Details | Verify against the applicable Woodward documentation and actual harness |
| Cable Length | Not independently verified |
| Power Supply | No standalone power-supply rating established for this service accessory |
| Installation | Connect according to the controller’s approved service procedure |
| Operating Temperature | Not independently verified |
| Condition | Confirm the actual item’s condition and completeness |
8923-1061
Related Products
The following items support the same service workflow or belong to the associated controller ecosystem. They are not direct replacements for the 8923-1061 harness.
- 9927-1222 Service Tool — Software identified in some L-Series service-tool packages. Confirm the software revision and operating-system requirements before use.
- Woodward L-Series Position Controller — The controller family for which the communication harness is intended. The exact controller model determines compatibility.
- Woodward L-Series Service Documentation — Provides model-specific connection instructions, configuration procedures, and safety precautions. Use the documentation revision applicable to the installed controller.
- Woodward Integrated Throttle Body (ITB) — A related application component used in certain engine-control arrangements. Confirm the controller and actuator combination before service.
- Woodward L-Series Controller Firmware — Firmware compatibility affects which software tools and functions are available. Verify the installed firmware part number and revision.
- Woodward Service Computer Interface — The computer-side interface must match the supplied harness and the documented connection arrangement. Do not assume that every USB-to-serial adapter is suitable.
- Woodward Controller Replacement Harness — Consider only when the alternative harness has a documented part-number cross-reference and matching pinout. Connector appearance alone is insufficient.
Frequently Asked Questions
Q1. What is Woodward 8923-1061 used for?
It is an L-Series serial communication harness used for service access to compatible Woodward position controllers. With the appropriate Service Tool and computer interface, technicians can configure, adjust, monitor, and troubleshoot the controller.
Q2. Is 8923-1061 a controller or a software license?
Neither. It is identified as a serial communication kit or harness. The controller is a separate hardware device, and the Service Tool software may be supplied separately depending on the package.
Q3. Does the kit include Service Tool software?
Not necessarily. Some package listings identify the 8923-1061 harness and the 9927-1222 Service Tool as separate items within a service-tool package. Ask the supplier to confirm exactly what is included and which software revision is provided.
Q4. Will it work with every Woodward controller?
No universal compatibility should be assumed. The 8923-1061 is associated with the L-Series position-controller family. Other Woodward controllers may use different connectors, communication interfaces, or software tools.
Q5. Does it support my controller’s firmware version?
Compatibility depends on the controller’s firmware and the applicable Service Tool revision. Check the controller firmware part number and revision against the supported-version list before attempting configuration or adjustment.
Q6. Can I use a generic USB-to-serial cable instead?
Only if the complete electrical interface, pinout, and communication arrangement are confirmed to match. A connector that physically fits may still be wired differently. Use the approved harness or a documented equivalent to avoid communication failures and potential equipment issues.
Q7. What should I check before purchasing a used or surplus kit?
Confirm the 8923-1061 marking, inspect the cable and both connectors, and ask whether communication has been tested with a compatible controller. Verify whether software is included, whether an adapter is required, and what warranty or return terms apply. For critical service work, functional testing is more useful than appearance alone.
