Description
Product Overview
The PROCES-DATA PD1611 is an analog transmitter belonging to the manufacturer’s Series 1000 industrial control modules. It is designed for process measurement applications where analog information must be acquired and made available to a connected control system. The manufacturer lists the PD1611 under product number 600045 and provides a dedicated technical manual for the module. Its classification distinguishes it from the PD3100 digital I/O interface and other Series 1000 devices such as multifunction and weight transmitters.
In industrial process installations, analog transmitters serve as an interface between measurement equipment and the control architecture. Correct operation depends on matching the measurement input, signal range, wiring arrangement, and connected controller configuration. For the PD1611, the available product identification confirms its analog-transmitter function, but does not provide enough verified information to assign a specific sensor type, input range, output current, accuracy, or supply voltage. These values should not be copied from other PROCES-DATA modules because the Series 1000 includes products with different measurement functions.
The PROCES-DATA PD1611 is most relevant to maintenance teams supporting an existing installation that uses this module. Before replacement, compare the product number 600045, module label, terminal arrangement, measurement configuration, and system documentation. The manufacturer’s dedicated PD1611 manual is the appropriate reference for confirming wiring and operating parameters. A replacement selected only by the PD1611 model designation should still be checked for hardware revision and application compatibility.
Product Introduction (Non-Templated)
An analog measurement fault can originate in the sensor, field wiring, transmitter, or receiving controller. The occupies the transmitter stage of that signal path within the PROCES-DATA Series 1000 product family.
Replacement work should begin with the original wiring diagram and transmitter manual. Confirm the input type and output configuration before reconnecting the field circuit.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Model | |
| Manufacturer | PROCES-DATA |
| Manufacturer Part Number | 600045 |
| Product Series | Module Series 1000 |
| Product Type | Analog Transmitter |
| Primary Function | Analog process measurement and signal transmission |
| Sensor Input Type | Not verified |
| Measurement Range | Not verified |
| Output Signal | Not verified |
| Supply Voltage | Not verified |
| Accuracy | Not verified |
| Communication Protocol | Not verified |
| Operating Temperature | Not verified |
| Installation Method | Confirm from original hardware documentation |
| Technical Manual | Analog Transmitter Manual |
PD1611
Related Products
These PROCES-DATA products belong to related industrial measurement and control equipment families. They are not confirmed direct replacements.
- PD1610 – Series 1000 analog transmitter. Its measurement application should be compared with the before substitution.
- PD1651 – Series 1000 multifunction transmitter for a different measurement application.
- PD1652 – Multifunction transmitter in the same general product family.
- PD1431 – Series 1000 weight transmitter designed for weighing applications.
- PD3100 – 32-channel digital I/O DC interface. It handles digital field signals rather than the ‘s analog-transmitter function.
Frequently Asked Questions
Q1: What is the PROCES-DATA used for?
The is an analog transmitter in the PROCES-DATA Series 1000 product family. It is intended for industrial process measurement applications.
Q2: What is the manufacturer part number for ?
The manufacturer’s product listing identifies with part number 600045.
Q3: Can I hot-swap the ?
Do not assume hot-swap capability. Follow the original equipment shutdown procedure and isolate the relevant electrical circuits before removing the transmitter.
Q4: Does the support firmware v3.1?
A specific firmware v3.1 compatibility statement has not been verified. Check the installed hardware revision and original system documentation.
Q5: Can I replace with PD1610?
Not without confirming the measurement function, electrical characteristics, and wiring configuration. Both are identified as analog transmitters, but that does not establish interchangeability.
Q6: What should I check before ordering a replacement?
Confirm the designation, part number 600045, hardware revision, terminal arrangement, sensor input, output signal, and supply requirements.
Q7: Is a technical manual available for ?
Yes. PROCES-DATA lists a dedicated document titled Analog Transmitter Manual, identified as document 50203101.pdf.
Procurement note: The model and manufacturer part number are identifiable, but the detailed electrical specifications remain unverified. Use / 600045 as the identification pair and request the original manual or a clear terminal-label photograph before confirming electrical interchangeability.
