Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 810-800082-043 |
| Manufacturer | Lam Research |
| Product designation | PCBA VME Breakout |
| Product category | VME interface / breakout board |
| Bus architecture | VMEbus |
| Backplane connection | Exact P1/P2 connector configuration requires verification |
| Signal routing | Verify against original schematic |
| Digital I/O capacity | Not independently confirmed |
| Supply voltage | Not independently confirmed |
| Operating current | Not independently confirmed |
| Communication speed | Depends on the installed VME system configuration |
| Board dimensions | Confirm from physical board documentation |
| Mounting format | Verify original rack and board configuration |
| Operating temperature | Not independently confirmed |
| PCB revision | Confirm from board label |
Specification caution: Some supplier listings describe this part as a VME motherboard, while others identify it as a breakout board or digital I/O assembly. Published claims of 24 VDC operation, 2 A output, 10 kHz frequency, and 32 digital I/O channels are not sufficiently supported by an identifiable LAM OEM datasheet. They should not be used as confirmed specifications.
Product Introduction
LAM Research 810-800082-043 VME Breakout Board
The LAM Research 810-800082-043 is identified as a VME breakout printed circuit board assembly used in compatible semiconductor equipment control systems. Its role is associated with signal interconnection and hardware integration within a VME-based control architecture. The board is a specialized equipment spare rather than a general-purpose VME computer motherboard.
810-800082-043
In semiconductor process equipment, correct signal routing is essential for communication between control electronics and peripheral assemblies. Replacement selection should therefore be based on the original board number, PCB revision, connector layout, and equipment configuration rather than the VME form factor alone.
Application Scenarios & Field Pitfalls
The 810-800082-043 is relevant to maintenance of legacy Lam Research equipment using VME-based control hardware. Incorrect board identification or connector mapping can interrupt signal paths between controller assemblies and connected equipment.
Potential application scenarios
- VME-based semiconductor equipment control cabinets.
- Signal interconnection between controller and peripheral boards.
- Maintenance of legacy Lam Research etch equipment.
- Replacement of damaged VME breakout PCB assemblies.
- Restoration of equipment signal paths during control-system servicing.
Field-engineering precautions
- Confirm the board designation. Check that the physical PCB label reads 810-800082-043. Similar 810-800082-series numbers should not be treated as equivalent.
- Compare connector layouts. Record P1/P2 connections, auxiliary connectors, and cable positions before removal.
- Verify electrical requirements. Do not assume the board operates exclusively on +5 VDC or +24 VDC without checking the original equipment schematic.
- Inspect signal-path components. Check connectors, solder joints, traces, and signs of thermal damage or contamination.
- Validate the complete assembly. A board that fits the VME slot may still have different signal routing or hardware revision requirements. Test it within the approved equipment configuration.
Related Products
- 810-800081-022 — LAM VME-related PCB assembly; a separate board designation requiring independent compatibility verification.
- 810-072907-005 — LAM VTM breakout PCB assembly, associated with equipment signal interconnection.
- 810-073479-215 — LAM semiconductor equipment motherboard assembly; different board designation and function.
- 810-068158-014 — LAM VIOP board assembly used in equipment control hardware.
- 810-068158-015 — Related LAM VIOP board assembly; verify revision and equipment compatibility.
- 810-046015-010 — LAM VIOP III board assembly, a separate control-board category.
These are related LAM equipment PCB references, not confirmed drop-in replacements.
Procurement recommendation: Request photographs of both PCB sides, the barcode/nameplate, connector layout, and revision markings. Also request confirmation that the supplied unit is the complete 810-800082-043 PCBA rather than a visually similar VME backplane. For semiconductor equipment, connector-level and functional verification should be completed before installation.
