GE C6M-9UH-00K UR Series Expansion Module | Datasheet

GE C6M-9UH-00K UR Series Expansion Module | Datasheet

  • Model: C6M-9UH-00K UR9CH
  • Brand: GE Multilin / General Electric
  • Series: Universal Relay (UR) Protection Platform
  • Core Function: Expands high-density digital and analog input/output routing within modular substation protection relays.
  • Product Type: UR Series Expansion / I/O Communication Module
  • Key Specs: Multi-channel discrete switching, high-isolation backplane connection, modular plug-in architecture
  • Condition: Factory Sealed / Fully Tested Surplus
Add To Quote
Category: SKU: GE C6M-9UH-00K

Description

Product Introduction (Non-Templated)

Substation technicians upgrading protection logic inside an established switchgear bay cannot afford communication card bottlenecks or slot mismatch errors. When a high-density expansion slot on a modular protection platform throws fatal hardware flags, finding an exact catalog match avoids costly wiring modifications.

The C6M-9UH-00K UR9CH serves as a specialized expansion module within GE’s versatile Universal Relay architecture. Deploying this drop-in hardware component restores full I/O capacity and event tracking without altering existing panel termination layouts.

 

Key Technical Specifications

  • Module Platform: GE Multilin Universal Relay (UR) Series
  • Input/Output Type: High-density digital/analog expansion channels
  • Mounting Style: Modular backplane slide-in chassis slot with retention hardware
  • Operating Temperature Range: -20°C to +60°C (-4°F to 140°F)
  • Isolation Rating: Heavy industrial galvanic isolation across card terminals
  • Enclosure Protection: IP20 open-chassis backplane board assembly
  • Diagnostics: Board-level status LEDs for power rail health and communication traffic

C6M-9UH-00K UR9CH

Application Scenarios & Pain Points

Substation protection faults require immediate hardware recovery to maintain mandatory grid compliance and prevent unmonitored line operations.

  • High-Voltage Substations: Expanding local trip and alarm contact capacities on primary transformer management terminals.
  • Power Generation Facilities: Interfacing auxiliary breaker feedback loops with central protection processors.
  • Industrial Distribution: Managing complex interlocking schemes across medium-voltage switchgear lineups.

A regional power utility in the Midwest faced expanding monitoring requirements on an aging UR protection bay without available spare terminals. Integrating a verified surplus C6M-9UH-00K UR9CH expansion card solved the channel deficit seamlessly.

 

Related Products

  • SR750-P5-G5-S5-HI-A20-R-T: GE Multilin feeder management relay; handles primary distribution protection separate from modular UR expansion hardware.
  • MVAX31S1DE0754A: Auxiliary protection relay module; supervises independent DC trip circuits within substation control cabinets.
  • SR469-P5-HI-A20: GE Multilin motor protection relay; dedicated to large industrial motor assets rather than modular UR chassis platforms.
  • DS3800HIOC: GE Mark IV digital I/O board; handles turbine-specific logic conditioning rather than electrical power substation switching.
  • IS220PPRFH1B: PROFIBUS master gateway module; manages industrial network bus communications outside of protective relay racks.

 

The Engineer’s Guide: Field Pitfalls to Avoid

  • Backplane Slot Misalignment: Forcing the modular card into an incorrect chassis slot index can bend delicate rear connector pins and disrupt the internal system bus. How to avoid: Check your UR chassis layout drawings and guide rail alignments carefully before sliding the module home.
  • Firmware vs. Order Code Mismatch: Inserting an expansion card with a conflicting firmware revision into an active UR base rack can trigger configuration error locks in the software suite. How to avoid: Verify your EnerVista UR setup software configuration file matches the physical hardware options code before enabling the node.
  • Control Power Transients: Failing to isolate auxiliary rack power during card handling risks damaging static-sensitive logic gates (take your time securing those retaining screws—loose front panel fasteners lead to poor grounding and intermittent bus errors).

 

Frequently Asked Questions (FAQ)

  • Can the C6M-9UH-00K UR9CH be hot-swapped in a live UR rack? While some UR chassis architectures feature advanced modular designs, standard substation safety protocols mandate isolating rack power before inserting or removing internal expansion cards.
  • What software is used to configure settings for this UR expansion module? Configuration, channel mapping, and setting modifications are managed through GE’s EnerVista UR Setup software platform.
  • What do the letters and numbers in the catalog string signify? They designate specific hardware options, communication protocols, power supply ranges, and I/O board configurations built into that exact factory build.
  • Are factory-sealed surplus units tested prior to shipment? Yes, verified surplus modules undergo comprehensive bench simulation testing to guarantee backplane communication and I/O channel continuity.
  • Why is the module showing an internal hardware error on the front display? A persistent error typically points to an uncommitted configuration profile, mismatched firmware build, or a seating issue on the backplane connector pins.

Related products