Description
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Display | 10.4-inch color TFT |
| Resolution | 640 × 480 pixels (VGA) |
| Color depth | Selectable 65,536 or 256 colors |
| Touch technology | Infrared, 79 × 59 logic channels |
| Processor | 32-bit RISC, 400 MHz |
| Internal memory | 64 MB DRAM |
| Flash memory | Approx. 1.5 MB available |
| Retained memory | Approx. 32 KB NVRAM |
| Power supply | 24 VDC nominal |
| Permissible operating voltage | 20.4–28.8 VDC |
| Maximum power consumption | 32 W |
| Ethernet | 1 × 10/100 Mbps |
| Serial interface | 1 × RS-232 |
| Fieldbus interface | 1 × CAN |
| USB | 2 × USB Host, 1 × USB Device |
| External storage | 2 × CompactFlash Type I/II slots |
| Operating system | Windows CE; license required |
| PLC software | XSOFT-CODESYS-2 / XSOFT-CODESYS-3 |
| Visualization software | GALILEO / EPAM |
| Operating temperature | 0 to +50°C |
| Storage temperature | -20 to +60°C |
| Front protection | IP65 |
| Rear protection | IP20 |
| Mounting | Flush panel mounting |
| Weight | Approx. 5.3 kg |
Product Introduction
The Eaton XV-440-10TVB-1-50 is an industrial operator panel from the XV400 series, designed for machine-level visualization and operator control. Its 10.4-inch VGA display uses infrared touch technology, while the stainless-steel front and laminated safety glass support installation in industrial control panels.
The unit includes Ethernet, RS-232, CAN, and USB interfaces. PLC functionality can be added through the appropriate license, so buyers should verify the installed software configuration rather than assume every unit includes an activated PLC runtime.
XV-440-10TVB-1-50
Application Scenarios & Field Pitfalls
Typical application scenarios
- Machine operator stations: Displays machine status, operating parameters, alarms, and control commands.
- Production-line visualization: Provides a local interface for monitoring equipment states and production sequences.
- PLC-based machine control: Supports PLC functionality when the required license and compatible software are installed.
- Industrial equipment retrofits: Can serve as an operator-interface component where the existing XV400 project, communication configuration, and mounting dimensions are compatible.
Field considerations
- Infrared touch versus resistive touch: The XV-440-10TVB-1-50 uses infrared touch technology. Do not confuse it with XV400 models that use resistive touch; their front-panel and touch characteristics differ.
- Software and licensing: Confirm the Windows CE license, CompactFlash contents, visualization project, and PLC runtime license. A replacement panel without the original project or required licenses may power up without reproducing the original machine functions.
- Communication compatibility: Ethernet, RS-232, and CAN are built-in interfaces, but the actual protocols and communication options depend on the software configuration and applicable licenses.
- Power supply: Check the 24 VDC supply under load. The specified operating range is 20.4–28.8 VDC, with maximum power consumption of 32 W.
- Panel protection: IP65 applies to the front when correctly installed; the rear is IP20. The panel enclosure must protect the rear from dust, moisture, and accidental contact.
- Display aging: The backlight uses two CCFL lamps. A used unit should be checked for brightness uniformity, touch response, and display discoloration.
Related Products
These XV400 models are useful for comparison when checking an existing installation. They are not automatically interchangeable.
- XV-440-10TVB-1-10 – Related 10.4-inch XV400 HMI-PLC model; compare touch and front-panel specifications.
- XV-430-10TVB-1-10 – 10.4-inch XV400 model with a different product configuration.
- XV-440-12TSB-1-10 – 12.1-inch panel with SVGA resolution; different display size and mounting requirements.
- XV-440-12TSB-1-50 – Related 12.1-inch model; verify touch technology and configuration before substitution.
- XV-430-12TSB-1-10 – 12.1-inch model with a different hardware configuration.
Procurement and Replacement Notes
When purchasing an Eaton XV-440-10TVB-1-50, verify the complete model number and part number 139908. Request photographs of the front, rear label, connectors, and CompactFlash cards. For used equipment, ask whether the display, infrared touch system, power supply, and communication interfaces have been functionally tested.
For replacement work, confirm the original GALILEO or EPAM visualization project, PLC software version, license status, communication modules, and CAN or serial-device settings. Also compare the panel cutout and mounting hardware before installation.
Important: The hardware model alone does not guarantee that the original application can be restored. Project files, licenses, and compatible software are essential parts of the replacement assessment.
