Description
Product Overview
The B&R 5AP1120.0702-000 is a 7-inch Automation Panel designed to provide operator interaction and process visualization in industrial control systems. It uses a TFT color display with WVGA resolution of 800 × 480 pixels and supports 16.7 million colors. The analog resistive single-touch interface allows operators to interact with displayed controls, process screens, alarms, and machine-status information. Its cabinet-mounted design makes it suitable for machine control stations and industrial operator panels where a dedicated display is required.
The B&R 5AP1120.0702-000 uses an LED backlight with adjustable brightness, typically specified between 80 and 500 cd/m². The touch controller uses a B&R serial interface with 12-bit resolution. The front side is rated IP65 under the stated installation conditions, while the rear side is rated IP20 when the required link module or system unit is installed. This distinction is important when assessing enclosure protection: the front rating does not mean the complete panel assembly is IP65.
For system integration, the B&R 5AP1120.0702-000 is intended for compatible AP1000, PPC2100, and PPC2200 configurations and is listed as compatible with the 5PP520.0702-00. It should not be treated as an independent HMI controller without the appropriate host or link hardware. Before replacing an installed panel, verify the host platform, link-module type, mechanical cutout, display revision, and Automation Studio hardware configuration. These checks are particularly important when replacing an older panel with a unit from a different hardware revision.
Product Introduction
A damaged operator panel can interrupt machine operation even when the PLC and control logic remain functional. Display readability, touch response, and host communication all matter when restoring an HMI station.
The 5AP1120.0702-000 combines a 7-inch display with a resistive touch interface. Replacement planning should focus on the connected B&R host or link module, physical mounting dimensions, and hardware revision—not just the screen size.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 5AP1120.0702-000 |
| Manufacturer | B&R Industrial Automation |
| Product Type | Automation Panel / HMI display |
| Display Technology | TFT color |
| Display Size | 7.0 inches |
| Resolution | 800 × 480 pixels, WVGA |
| Color Depth | 16.7 million colors |
| Contrast Ratio | 550:1 for revision D0 and later; up to 600:1 through revision C0 |
| Touch Technology | Analog resistive, single-touch |
| Touch Controller | B&R serial, 12-bit |
| Touch Transmittance | 81% ±3% |
| Backlight | LED |
| Brightness | Typically 80–500 cd/m², dimmable |
| Backlight Half-Brightness Life | 50,000 hours |
| Horizontal Viewing Angle | 70° left / 70° right |
| Vertical Viewing Angle | 50° up / 60° down for current listed revision |
| Front Protection | IP65 |
| Rear Protection | IP20, with specified link module or system unit installed |
| UL Enclosure Rating | Type 4X, indoor use only, front |
| Installation | Control cabinet, landscape orientation |
| Width | 212 mm |
| Height | 156 mm |
| Weight | Approximately 900 g |
| Compatible Systems | AP1000, PPC2100, PPC2200, compatible link modules |
| Compatible Panel PC | 5PP520.0702-00 |
| B&R ID Code | 0xE7AC |
| Certifications | CE, UKCA, cULus, cULus HazLoc |
5AP1120.0702-000
Major Features and Advantages
7-inch WVGA color display
The 800 × 480 resolution provides a practical display area for machine operating screens, process values, alarms, and equipment status. The 16.7-million-color display supports clear differentiation of visual elements in operator interfaces.
Resistive single-touch operation
The analog resistive touch surface is designed for single-point operator input. Unlike projected-capacitive panels, resistive technology responds to applied pressure. This can be useful in industrial environments where operators may use gloves or a stylus, subject to the actual operating conditions.
Dimmable LED backlight
Brightness can typically be adjusted from 80 to 500 cd/m². This helps adapt the screen to different cabinet locations and ambient lighting conditions. The listed half-brightness time is 50,000 hours; this is a reference value, not a guarantee of actual service life.
Cabinet-mounted construction
The panel has a 212 × 156 mm front dimension and an aluminum frame with a fixed 3 mm gasket. These mechanical details should be checked against the existing cabinet opening and mounting arrangement before ordering.
Front-side environmental protection
The front is rated IP65, while the rear is rated IP20 under the specified installation arrangement. This makes correct mounting and enclosure sealing important. The front rating must not be interpreted as protection for the entire rear assembly.
B&R host-system compatibility
The panel is specified for AP1000, PPC2100, and PPC2200 configurations, with compatible link modules. It is also listed as compatible with 5PP520.0702-00. Host compatibility and software configuration must be verified before installation.
Related Products
- 5PP520.0702-00 – B&R Panel PC model listed as compatible with this Automation Panel.
- AP1000 – B&R Automation Panel system family supported by this display.
- PPC2100 – B&R Panel PC platform compatible with the panel.
- PPC2200 – B&R Panel PC platform compatible with the panel.
- 5AP1120 Series – Related B&R Automation Panel product family; verify individual screen and interface specifications before substitution.
These are compatibility references, not universal drop-in replacements.
Frequently Asked Questions
Q1: What is the B&R 5AP1120.0702-000 used for?
It is a 7-inch industrial Automation Panel used as an operator display for compatible B&R host systems. It provides color visualization and resistive touch input for machine and process operation.
Q2: What is the display resolution?
The panel uses an 800 × 480 WVGA TFT color display with 16.7 million colors.
Q3: Is the 5AP1120.0702-000 a standalone HMI?
No. It is a display panel intended for use with compatible B&R host systems or link modules. Confirm the required host hardware and interface before purchasing it as a replacement.
Q4: Can I hot-swap this panel?
Do not assume powered replacement is permitted. Follow the host system’s installation instructions and site maintenance procedure. Isolate the relevant power supply before disconnecting the panel unless the applicable documentation explicitly permits online replacement.
Q5: Does the 5AP1120.0702-000 support firmware v3.1?
A specific firmware v3.1 compatibility statement has not been verified. B&R lists separate Automation Panel firmware upgrade packages and Automation Studio hardware upgrades. Check the installed host platform, panel hardware revision, and applicable upgrade documentation before applying firmware.
Q6: Is the entire panel IP65 rated?
No. The published specification identifies IP65 protection on the front and IP20 on the rear under the stated installation conditions. The complete cabinet assembly must be evaluated separately.
Q7: What should I check before ordering a replacement?
Confirm the complete part number, display revision, host platform, link-module compatibility, cabinet cutout, front gasket condition, touch response, and display brightness. Request a functional test report where the panel is supplied as used or refurbished.
Procurement and Quality Inspection Notes
Before accepting a replacement B&R 5AP1120.0702-000, verify:
- Complete model number and hardware revision.
- 7-inch, 800 × 480 display operation.
- Touch response across the active screen area.
- Backlight brightness and uniformity.
- Display condition, including dead pixels and surface damage.
- Front gasket and aluminum frame condition.
- Compatibility with the installed AP1000, PPC2100, or PPC2200 system.
- Correct link-module or host connection.
- Cabinet mounting dimensions.
- Applicable firmware and hardware-upgrade compatibility.
- Required certification for the installation environment.
Important revision consideration: The published contrast ratio and vertical viewing-angle specifications differ between hardware revisions. For revision D0 and later, the listed contrast ratio is 550:1; earlier revisions up to C0 are listed at 600:1. Check the revision marking when matching an existing display.
