Description
Product Overview
The B&R 3IF152.60-2 is a programmable interface processor designed for B&R System 2005 industrial automation equipment. Identified as the IF152, this module provides an RS232 serial interface and an electrically isolated CAN interface that supports network communication. It is intended for applications where a control system needs to exchange data with serial devices or communicate over a CAN network. The processor’s onboard memory consists of 118 KB SRAM and 512 KB FlashPROM, supporting its programmed interface functions and associated data handling. These characteristics make the module relevant to legacy automation systems that depend on established communication hardware.
The B&R 3IF152.60-2 supports integration through two distinct communication interfaces. RS232 can serve point-to-point serial communication needs, while the electrically isolated CAN interface supports communication with compatible network devices. Electrical isolation is an important consideration when evaluating interfaces exposed to differing ground potentials or electrically noisy installations, although the protection provided must be assessed against the actual system design. The module’s documented maximum power consumption is 4 W. Before installation, engineers should confirm the correct System 2005 base and slot arrangement, interface wiring, CAN node configuration, serial parameters, and the application software expected by the host controller.
For maintenance teams sourcing a B&R 3IF152.60-2 replacement, matching the exact material number is essential. A related module may have similar communication capabilities but differ in hardware revision, memory, or operating role. Before commissioning, inspect the module’s identification label and connector condition, compare its configuration with the existing unit, and confirm that the host application supports the replacement. B&R’s documentation identifies the 3IF152.60-2 as an industrial control component and lists CE and cULus certification information. For legacy installations, verify the applicable documentation revision and the equipment’s original design requirements rather than assuming that a similar interface processor can be substituted without changes.
Product Introduction
Legacy System 2005 installations may depend on serial and CAN communication paths that are difficult to replace without modifying the wider control architecture. The B&R 3IF152.60-2 combines one RS232 interface and one electrically isolated CAN interface in a programmable processor module, with 118 KB SRAM and 512 KB FlashPROM.
For replacement planning, verify the module’s slot compatibility, communication settings, and application requirements before installation. Matching the exact part number helps reduce unnecessary changes to established control-system wiring and software.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | B&R Industrial Automation |
| Parent Company | ABB Group |
| Model Number | 3IF152.60-2 |
| Module Designation | IF152 |
| Product Type | Programmable interface processor |
| Automation Platform | B&R System 2005 |
| SRAM | 118 KB |
| FlashPROM | 512 KB |
| Serial Interface | 1 × RS232 |
| Fieldbus Interface | 1 × CAN |
| CAN Isolation | Electrically isolated |
| CAN Capability | Network-capable |
| Maximum Power Consumption | 4 W |
| Certification | CE; cULus listed in B&R documentation |
| Installation | System 2005 rack/base; verify slot requirements |
| Supply Requirements | Confirm the applicable System 2005 hardware documentation |
| Operating Temperature | Verify against the relevant hardware manual |
| Protection Rating | Not confirmed for the exact module |
| Product Status | Confirm current serviceability and availability |
Specifications are based on B&R product information and the IF152 technical documentation. Parameters not verified in the available manufacturer data are marked for confirmation rather than inferred from other modules.
3IF152.60-2
Related Products
The following B&R components are related by platform or interface function. They are not confirmed direct replacements for the 3IF152.60-2.
- 3IF152.60-1 — Related IF152 model with RS232 and CAN interfaces; verify hardware differences and application compatibility.
- 3IF260.60-1 — System 2005 processor/interface family component with a different memory configuration and module role.
- 3EX450.71-1 — B&R CAN fieldbus interface module for System 2005 applications.
- 3EX450.66-2 — B&R PROFIBUS DP master bus-controller module for compatible automation configurations.
- 3EX450.26-2 — B&R InterBus master bus-controller module for systems requiring that fieldbus.
- 3IF050.6 — B&R interface-module family component; verify its specific function and platform requirements before selecting it.
- 3IF060.6 — B&R interface-module family component; confirm communication capabilities and hardware compatibility from its own technical documentation.
Frequently Asked Questions
1. What is the B&R 3IF152.60-2 used for?
It is a programmable interface processor for B&R System 2005 automation equipment. It provides RS232 serial communication and an electrically isolated CAN interface for supported control-system communication tasks.
2. Does the 3IF152.60-2 support CAN communication?
Yes. B&R documents one electrically isolated, network-capable CAN interface. Confirm the network’s wiring, node configuration, and communication parameters before connecting it to an existing CAN installation.
3. How much memory does the IF152 processor have?
The documented configuration includes 118 KB SRAM and 512 KB FlashPROM. These are the published memory figures for the 3IF152.60-2; do not assume that other IF-series modules use the same memory configuration.
4. Can I hot-swap the 3IF152.60-2?
Do not assume hot-swap support. The available documentation identifies it as a System 2005 module but does not establish that live insertion or removal is permitted in every system configuration. Follow the equipment manufacturer’s service procedure and isolate power as required.
5. Can I replace the 3IF152.60-2 with the 3IF152.60-1?
The two models share the designation and /CAN interface description, but that alone does not confirm interchangeability. Compare the complete hardware documentation, revision, slot requirements, and application configuration before selecting the 3IF152.60-1 as a substitute.
B&R Industrial Automation+1
6. How can I verify the condition of a replacement module?
Inspect the model and revision markings, connector pins, board condition, and signs of corrosion or prior repair. Request functional-test evidence covering both and CAN interfaces where possible. A visual inspection alone cannot establish that the processor and communication circuits are operating correctly.
7. Will the replacement retain the original program and communication settings?
Do not assume that the existing application or settings will be retained by a replacement module. Record the original configuration, confirm how the system stores its program and parameters, and verify the relevant interface settings before removing the installed unit. After installation, test communication with the host system and connected devices before returning the equipment to service.
