Description
Product Overview
The Applied Materials AMAT 0100-71267 is an 8-channel PCI Mezzanine Card (PMC) assembly designed for integration into Applied Materials semiconductor manufacturing equipment. This board provides additional hardware capability for equipment control systems by extending signal acquisition, processing, and interface functions within the host control architecture. The Applied Materials AMAT 0100-71267 is typically installed as part of a larger semiconductor tool control platform where precise communication between embedded controllers and process subsystems is required.
The Applied Materials AMAT 0100-71267 belongs to the family of specialized AMAT equipment spare assemblies used in wafer fabrication environments. As a PMC-based card, it interfaces with compatible embedded computing platforms rather than operating as an independent PLC module. Its function depends on the specific AMAT process tool configuration, installed controller hardware, software revision, and machine-level application settings.
Within semiconductor manufacturing equipment, the Applied Materials AMAT 0100-71267 supports equipment-level control tasks such as channel expansion, data acquisition, and communication between internal subsystems. These functions are important in applications where process chambers, sensors, motion systems, and control electronics must exchange accurate operational information. The board is generally associated with AMAT semiconductor equipment platforms requiring dedicated hardware interfaces.
To be completely transparent, AMAT spare assemblies require careful part-number and revision verification before installation. Semiconductor equipment platforms often contain multiple similar-looking control cards with different firmware requirements, connector assignments, and application roles. Confirming the exact tool model, slot position, board revision, and existing configuration reduces commissioning risk.
For maintenance teams supporting installed AMAT production tools, the Applied Materials AMAT 0100-71267 provides a direct hardware replacement option when the original PMC assembly is no longer functioning correctly. Proper ESD handling, cleanroom procedures, and post-installation diagnostics are required before returning the equipment to production service.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Model | AMAT 0100-71267 |
| Manufacturer | Applied Materials (AMAT) |
| Product Type | PCI Mezzanine Card (PMC) Assembly |
| Board Function | Equipment I/O expansion and signal processing |
| Interface Type | PCI Mezzanine Card |
| Channel Configuration | 8-channel design |
| Application | Semiconductor manufacturing equipment |
| Installation Location | Embedded equipment controller chassis |
| Operating Environment | Semiconductor cleanroom equipment environment |
| Power Source | Supplied through host equipment system |
| Communication Interface | PMC system bus interface |
| PCB Type | Industrial control circuit board |
| Typical Use | Wafer processing equipment maintenance |
| Handling Requirement | ESD-controlled installation procedure |
0100-71267
Related Products
- AMAT 0100-71278 — VME communication interface board associated with AMAT semiconductor control platforms. Used for system communication expansion rather than PMC channel functions.
- AMAT 0100-71229 — Main control board assembly used in AMAT equipment architectures. Provides higher-level processing functions compared with the 0100-71267 expansion card.
- AMAT 0100-71311 — Semiconductor system card used in AMAT equipment control applications. Requires platform verification before replacement.
- AMAT 0100-71313 — Circuit board assembly for semiconductor equipment systems. Similar application category but different hardware function.
- AMAT 0190-15384 — Delta Tau CPCI I/O board assembly used for motion and control interface applications. Provides different I/O architecture compared with PMC cards.
- AMAT 0190-24007 — CPCI CPU board assembly used for embedded equipment computing functions. Acts as a processor platform rather than an expansion interface.
- AMAT 0010-23716 — Semiconductor equipment signal conditioning module used for analog measurement and control applications.
Frequently Asked Questions (FAQ)
1. What is the AMAT 0100-71267 used for?
The AMAT 0100-71267 is a PMC expansion card used in Applied Materials semiconductor manufacturing equipment. It provides additional channel capability for equipment-level data acquisition, signal handling, and internal control functions.
2. Can I hot-swap the AMAT 0100-71267?
No. Semiconductor equipment control boards should normally be replaced under controlled maintenance conditions.
Recommended steps:
- Shut down the applicable equipment module.
- Follow ESD protection procedures.
- Record board location and revision.
- Replace the PMC card.
- Run equipment diagnostics before production release.
3. Does the AMAT 0100-71267 support firmware v3.1?
The board itself is not typically managed like a PLC CPU with a user-selected firmware version.
Compatibility depends on:
- AMAT equipment platform
- Controller software package
- Board revision
- Slot configuration
- Tool-specific application files
The installed machine configuration should be checked before replacement.
4. Will replacing the AMAT 0100-71267 erase my process recipes?
No. The PMC card is a hardware interface component and does not normally contain the complete equipment recipe database.
After replacement, engineers should verify:
- Board recognition
- Communication status
- I/O channel operation
- Equipment diagnostics
5. How can I verify a New Surplus AMAT 0100-71267?
Recommended inspection steps:
- Confirm AMAT part number marking.
- Check revision identification.
- Inspect PMC connector pins.
- Verify ESD-safe packaging.
- Test the board within the target equipment configuration.
6. Which Applied Materials tools are compatible with AMAT 0100-71267?
Compatibility depends on the exact AMAT equipment platform and installed control architecture. The same part number may require a matching software environment, board revision, and machine configuration before operation.
7. Is the AMAT 0100-71267 suitable for semiconductor equipment upgrade projects?
It is mainly used for maintaining existing Applied Materials production tools. For upgrade projects, engineers should evaluate the complete controller architecture, software compatibility, process qualification requirements, and available replacement strategies before changing hardware.
