Description
Applied Materials 0195-14157.RMA — Chamber Interface Module
Product Overview
The Applied Materials 0195-14157.RMA is an electronic assembly associated in supplier listings with Applied Materials semiconductor manufacturing equipment. It is marketed as a chamber signal interface and I/O control module, although a manufacturer-issued technical datasheet confirming the exact functional designation was not located. The part should therefore be treated as a tool-specific electronic control assembly until the equipment bill of materials or original service documentation confirms its role. In semiconductor processing equipment, electronic interface assemblies may support communication between control electronics and chamber-level devices, but the exact signals, channels, and control responsibilities of this model should not be inferred from the part number alone.
Supplier descriptions associate the 0195-14157.RMA with the Centura, Endura, and Producer equipment families and report +5 VDC and +24 VDC supply rails. Those details are useful for initial identification, but they are not sufficient for installation. The supported tool generation, board revision, connector pinout, backplane interface, and software configuration must be checked against the specific system. Claims about analog resolution, digital channel count, hot-swap capability, or detailed process-control functions should not be accepted without an applicable OEM drawing or service manual. Semiconductor tool assemblies often have configuration dependencies that are not apparent from the external board appearance.
For maintenance and procurement teams, the Applied Materials 0195-14157.RMA should be sourced against the exact assembly label and the equipment in which it will operate. Confirm whether the offered unit is new, used, repaired, or remanufactured, and request the associated inspection and test records. The suffix “.RMA” alone does not prove factory recertification or a particular warranty status. Before installation, use the approved tool procedure for power isolation and electrostatic-discharge protection. Verify the board revision, connectors, supply requirements, and configuration records before returning the equipment to operation. These checks reduce the risk of installing a visually similar but electrically or functionally incompatible assembly in a production tool.
Product Introduction — Practical Field Focus
The 0195-14157.RMA is a legacy semiconductor-equipment spare that should be identified through its complete label and the host tool’s parts documentation. Supplier listings provide useful platform associations, but they do not replace the tool-specific service manual.
Before ordering, photograph the label and connectors, record the tool model and board revision, and ask the supplier to document the unit’s condition. After installation, complete the required diagnostics and tool-level functional checks before releasing the equipment for wafer processing.
Key Technical Specifications
| Parameter | Details |
|---|---|
| Product Model | 0195-14157.RMA |
| Manufacturer | Applied Materials (AMAT), according to supplier listings |
| Product Type | Electronic control/interface assembly; exact OEM classification unverified |
| Application | Semiconductor manufacturing equipment |
| Associated Platforms | Centura, Endura, and Producer are reported by suppliers; confirm the exact tool |
| Reported Supply Rails | +5 VDC and +24 VDC; verify the electrical drawing |
| Signal Channels | Not independently confirmed |
| Analog Resolution | Not independently confirmed |
| Backplane / Communication Interface | Requires OEM documentation |
| Installation Method | Tool-specific board or assembly installation; verify the service procedure |
| Hardware Revision | Must match the applicable tool configuration |
| Firmware / Software Dependencies | Verify with the host system documentation |
| Hot-Swap Capability | Not confirmed; do not assume live replacement is permitted |
| Environmental Rating | Not confirmed |
| Condition Options | Confirm whether the offered unit is new, used, repaired, or remanufactured |
| Compatibility Requirement | Match full part number, revision, tool model, and assembly configuration |
0195-14157.RMA
Related Products
These are related Applied Materials part-number references found in supplier or parts-listing contexts. They are not verified direct replacements for 0195-14157.RMA.
- Applied Materials 0195-03244 — Listed as a related digital I/O component in supplier descriptions; verify its function and tool compatibility.
- Applied Materials 0190-series assemblies — A broad group of electronic control and interface parts; individual part numbers have distinct functions.
- Applied Materials 0200-series assemblies — Related equipment electronics and board references; not interchangeable as a family.
- Applied Materials 0100-series assemblies — A broad group of control-electronics references used across some equipment configurations.
- Applied Materials Centura platform spares — Relevant when identifying the exact equipment generation and installed assembly.
- Applied Materials Endura platform spares — Relevant for tool-specific cross-reference and service documentation.
- Applied Materials Producer platform spares — Relevant only after confirming the specific tool and configuration.
Frequently Asked Questions
Q1. What is Applied Materials 0195-14157.RMA?
Supplier listings identify it as an Applied Materials electronic assembly and describe it as a chamber signal interface/I/O control module. The exact OEM functional classification should be confirmed from the equipment parts list or service documentation.
Q2. Which semiconductor tools use this part?
Supplier listings associate the part with Centura, Endura, and Producer platforms. These are broad platform associations, not proof that the assembly is compatible with every tool or chamber in those families.
Q3. Does it require both +5 VDC and +24 VDC?
Supplier descriptions report both supply rails, but the applicable electrical drawing must confirm the actual requirements, pin assignments, and allowable ranges. Do not energize the assembly based solely on a reseller description.
Q4. Does the “.RMA” suffix mean the module is factory refurbished?
Not necessarily. The suffix may be used in a return, repair, or remanufacturing context, but its precise meaning and certification status must be confirmed with the supplier or original equipment documentation.
Q5. Can this assembly be hot-swapped?
Hot-swap capability has not been verified. Unless the applicable Applied Materials service documentation explicitly authorizes live replacement, follow the approved shutdown, isolation, and ESD-control procedure.
Q6. What should procurement verify before ordering?
Confirm the complete part number, board revision, equipment model, connector layout, electrical requirements, and the supplier’s condition classification. Request traceable inspection or functional-test records and written warranty terms.
Q7. Can a similar 0195-series board replace this unit?
No substitution should be approved based on a shared number prefix or similar appearance. Confirm the functional role, electrical interface, board revision, and equipment-OEM cross-reference first.
Q8. What checks should be completed after installation?
Follow the tool-specific commissioning procedure. At minimum, verify correct seating and connections, applicable power rails, controller diagnostics, communication status, and the relevant chamber functions before returning the tool to production.
