Description
Product Overview
The ALSTOM PIB100G 3BEE0226 is a Power Interface Board associated with ALSTOM and CONVERTEAM industrial control equipment. It is a printed circuit board assembly designed to provide interface functions within the equipment’s control architecture. Available product identification records describe the PIB100G as having a one-digit display, CAN bus communication, receiver and transmitter ports, and serial communication connections. These features distinguish it from a basic power supply board or general-purpose PLC I/O module.
The board’s CAN bus and serial communication interfaces are relevant when identifying its role in the wider control system. The one-digit display provides a local indication function, although the exact diagnostic codes and operating states have not been confirmed from a manufacturer manual. Likewise, the receiver and transmitter ports indicate additional interface capability, but their electrical characteristics and supported protocols should not be assumed without the original technical documentation.
For maintenance teams, the ALSTOM PIB100G 3BEE0226 should be matched using the complete part number and PCB revision. A physical replacement needs to match the connector arrangement, board layout, communication wiring, and host-system configuration. The part is reported as discontinued, which makes inspection and functional testing particularly important when sourcing service stock.
Before installation, verify the board’s supply requirements, connector pinout, firmware or programmable logic revision if applicable, and compatibility with the installed ALSTOM/CONVERTEAM equipment. The available identification data confirms the board’s general function and interfaces, but does not provide enough evidence to publish exact voltage, current, or environmental ratings.
Product Introduction (Non-Templated)
A failed interface board can interrupt communication between control-system sections even when the main controller and power equipment remain operational. The PIB100G is identified by its CAN bus, serial communication ports, receiver/transmitter connections, and one-digit display.
Replacement selection should focus on the complete 3BEE0226 part number and the physical PCB revision. Connector similarity alone is not sufficient evidence of compatibility.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ALSTOM / CONVERTEAM |
| Product Model | PIB100G |
| Part Number | 3BEE0226 |
| Product Type | Power Interface Board |
| Hardware Format | Printed circuit board assembly |
| Display | 1-digit display |
| CAN Bus | Listed |
| Receiver Ports | Listed |
| Transmitter Ports | Listed |
| Serial Communication Ports | Listed |
| Input Voltage | Not verified |
| Output Voltage | Not verified |
| Current Rating | Not verified |
| Power Consumption | Not verified |
| Communication Speed | Not verified |
| Connector Pinout | Not verified |
| Operating Temperature | Not verified |
| Protection Rating | Not verified |
| Product Lifecycle | Reported discontinued |
PIB100G-3BEE0226
Major Features and Advantages
Power interface functionality
The PIB100G is identified as a power interface board used within compatible ALSTOM/CONVERTEAM equipment. Its precise internal power-distribution and signal-conditioning functions require confirmation from the relevant equipment documentation.
CAN bus communication
The board is listed with CAN bus capability. This interface is relevant to communication between compatible control-system components. Confirm the network wiring, termination, and communication configuration before reconnecting a replacement.
Serial communication connections
The includes listed serial communication ports. Their electrical standard and protocol assignment are not confirmed, so technicians should verify the connector pinout before applying signals.
Receiver and transmitter ports
Separate receiver and transmitter connections are identified in product records. These interfaces may form part of the board’s equipment-level communication architecture; their exact function should be established from the host-system drawings.
Local display indication
The one-digit display provides a local visual indication. Do not interpret its displayed values as specific fault codes without the corresponding technical manual.
Replacement identification
The full 3BEE0226 designation provides a practical identification reference for maintenance procurement. Since the model is reported discontinued, checking the PCB revision and functional test evidence is important.
Related Products
The following are related ALSTOM/CONVERTEAM PCB or interface-board models. They are not confirmed direct replacements for .
- PIB101C 3BD91299 — Related CONVERTEAM PIB interface-board model.
- PIB102A 3BEB0180 — Related ALSTOM PCB assembly.
- PIB201A 3BEC0067 — Related CONVERTEAM interface-board family.
- PIB310 3BEB0190 — Related ALSTOM/CONVERTEAM PCB module.
- PIB903 — CONVERTEAM BGTR 8HE rack-associated board designation.
- MAE99-04 — ALSTOM eight-channel serial interface isolation unit.
Frequently Asked Questions
Q1: What is the ALSTOM 3BEE0226?
It is a Power Interface Board associated with ALSTOM/CONVERTEAM equipment. Available identification records list a one-digit display, CAN bus, receiver and transmitter ports, and serial communication connections.
Q2: Is the a PLC input/output module?
It is identified as a power interface board, not a conventional digital or analog PLC I/O module. Its exact relationship to the host controller should be checked against the equipment drawings.
Q3: Can I hot-swap this board?
Do not assume hot-swap capability. Isolate the equipment and follow the manufacturer’s maintenance procedure before removing the board. Verify that stored energy has been discharged and that connected control circuits are in a safe state.
Q4: Does the support firmware v3.1?
Firmware compatibility is not established by the available product identification. Confirm whether the board contains programmable firmware and check its revision against the host equipment’s documentation.
Q5: What communication interfaces does this board have?
Available product records identify CAN bus and serial communication ports, along with receiver and transmitter connections. Exact protocol assignments, baud rates, and electrical standards remain unverified.
Q6: Is 3BEE0226 discontinued?
A product identification record reports that the manufacturer discontinued the model. Confirm lifecycle status and service support against the installed equipment documentation before planning a replacement.
Q7: What should I check before ordering a replacement?
Check the complete 3BEE0226 marking, PCB revision, connector positions, board condition, and any display indications. Request functional test evidence covering the CAN and serial interfaces where testing facilities are available.
Procurement note: The product identity and main interface features are established, but exact electrical ratings and connector pin assignments remain unverified. For a discontinued board, request clear PCB photographs and a test report before approving it as a replacement.
