Description
Product Overview
The ABB SC610 3BSE001552R1 is a dedicated submodule carrier used in ABB Advant Controller 100 Series control systems. Its purpose is to provide the physical mounting and electrical connection arrangement for compatible communication interface submodules. ABB documentation specifically identifies the SC610 as the carrier required for connecting CI532 modules, with space for two CI532 units in one carrier.
In a legacy distributed control system, the carrier is part of the communication hardware assembly rather than the device that independently executes communication protocols. The CI532 module installed on the carrier provides the relevant Multi-Vendor Interface functionality. Depending on the CI532 version, this can include interfaces using RCOM/RCOM+, Modbus, or Siemens 3964(R) protocols. The carrier and interface modules therefore need to be treated as a matched hardware arrangement.
The SC610 is particularly relevant when maintaining existing Advant installations where replacing the complete communication assembly would be more disruptive than restoring the original hardware configuration. Before procurement, verify the carrier’s part number, connector condition, mounting arrangement, and compatibility with the installed CI532 versions. A carrier that physically fits the panel is not necessarily suitable for a different controller generation.
For purchasing and maintenance purposes, the complete identifier 3BSE001552R1 should be retained on the order. Request clear photographs of the actual carrier and connector areas, along with condition disclosure and inspection or functional-test details. Since the SC610 is a supporting carrier, inspection should focus on physical integrity and electrical connections rather than treating it as an independently programmable module.
Product Introduction
When a legacy ABB communication interface needs repair, the carrier hardware matters just as much as the installed submodule. The ABB SC610 3BSE001552R1 provides the carrier arrangement for up to two CI532 modules in Advant Controller 100 Series systems.
Before ordering, confirm the existing carrier identification and module versions. Inspect connectors, board condition, and mounting points, and verify that the replacement matches the installed controller arrangement.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | SC610 |
| Order Number | 3BSE001552R1 |
| Catalog Description | Submodule Carrier |
| Product Type | Communication module carrier |
| System Family | Advant Controller 100 Series |
| Compatible Submodule | SC610 |
| Carrier Capacity | Two modules |
| Main Function | Physical mounting and electrical connection |
| Dimensions | 252 × 273 × 40 mm |
| Net Weight | 1.44 kg |
| Processor | None; carrier hardware |
| Standalone Protocol Processing | No; depends on installed interface modules |
| Supply Requirements | Verify in the complete system assembly documentation |
| Operating Temperature | Confirm from the applicable ABB documentation |
| Protection Rating | Confirm from the applicable installation documentation |
The product identity, capacity, dimensions, and weight are listed in available product data for 3BSE001552R1. Environmental and electrical limits should be verified against the relevant ABB documentation before installation.
PM633 3BSE008062R1
Related Products
- ABB CI532V01 — 3BSE003826R1: Multi-Vendor Interface module supporting RCOM/RCOM+ protocols and two buses.
- ABB CI532V02 — 3BSE003827R1: Multi-Vendor Interface module for Modbus protocol applications.
- ABB CI532V03 — 3BSE003828R1: Multi-Vendor Interface module supporting Siemens 3964(R).
- ABB TC562 — 3BSC630049R1: Short-distance modem used for compatible communication links, with a documented cable-length application below 10 km.
- ABB TK595 — 3BSE006830R1: Cable assembly for connecting CI53x interface modules to a compatible TC562 modem.
These components serve different roles in the communication assembly. The version determines the communication protocol, while the provides the carrier arrangement. Confirm the full assembly configuration before ordering replacement parts.
Frequently Asked Questions
Q1. What is the ABB 3BSE001552R1 used for?
It is a submodule carrier for the Advant Controller 100 Series, required for connecting compatible communication interface modules.
Q2. How many modules fit on one ?
One carrier accommodates up to two modules.
Q3. Is itself a communication processor?
No. It is a carrier board. The installed module provides the protocol-specific communication interface functions.
Q4. Can I use any version with this carrier?
The is documented as the carrier for modules, but the intended protocol, controller configuration, and submodule version still need to be checked. CI532V01, CI532V02, and CI532V03 have different protocol functions.
Q5. Does the require software configuration?
The carrier itself is not a standalone programmable controller. Configuration requirements depend on the installed modules and the host Advant system.
Q6. What should be inspected before purchasing a used carrier?
Check the exact part number, board condition, connectors, mounting points, signs of overheating or corrosion, and evidence of inspection. If the carrier is supplied with modules, verify their individual part numbers separately.
Q7. Is interchangeable with newer ABB carrier hardware?
Do not assume so. Confirm the rack, connector layout, controller generation, and intended assembly before substituting another carrier.
Procurement recommendation: Specify ABB , 3BSE001552R1 and confirm whether the purchase is for the carrier alone or for a complete assembly with interface modules. That distinction helps avoid receiving the wrong hardware for a legacy Advant communication system.
