Description
Product Overview
The ABB PP885 3BSE069276R1 is a high-performance operator interface from the Panel 800 Version 6 family. It provides a local human-machine interface (HMI) for industrial automation equipment, allowing operators to view process information, monitor alarms, review trends, and interact with configured control applications. Its 15.4-inch widescreen display and 1280 × 800 resolution support detailed process graphics and multi-screen operator layouts.
The PP885 uses an Intel Atom processor, 1 GB of DDR2 RAM, and 2 GB of NAND flash application memory according to ABB’s hardware manual. Connectivity includes one shielded Gigabit Ethernet port, three USB 2.0 host ports, and serial interfaces supporting RS-232 and RS-422/485 configurations. This interface flexibility can support different controller connections, but actual protocol support depends on the selected driver and project configuration. The panel is configured using Panel Builder 800 Version 6, with the project transferred to and stored on the operator panel.
For maintenance and procurement teams, the important distinction is that an HMI is more than a display. A replacement unit must be compatible with the installed project, communication drivers, controller interface, and mounting arrangement. The PP885 operates from a nominal 24 V DC supply, accepts 18–32 V DC, and consumes approximately 24 W. Its front panel is rated IP65, while the rear is IP20, so cabinet sealing and installation conditions matter. Before ordering a replacement, confirm the exact article number, inspect touch response and display condition, and establish whether the original Panel Builder project and compatible engineering software are available.
Product Introduction
The ABB PP885 is intended for applications requiring a larger operator display and direct access to industrial controller data. It supports common HMI functions such as dynamic indications, alarm handling, recipe handling, and time-based functions. Its resistive touchscreen is specified for one million finger-touch operations, making touch accuracy and screen condition important inspection points for used equipment.
When replacing a failed panel, do not assume that a physically compatible HMI will automatically run the existing application. Confirm that the project can be opened and downloaded with the correct Panel Builder software version, and verify serial pin assignments, Ethernet configuration, and controller drivers. Preserve a backup of the original project before changing the installed panel.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | PP885 |
| Article Number | 3BSE069276R1 |
| Product Family | Panel 800 Version 6 |
| Product Type | High-performance industrial HMI |
| Display Size | 15.4 inches |
| Display Technology | TFT-LCD with LED backlight |
| Resolution | 1280 × 800 pixels |
| Display Colors | 262,000 |
| Brightness | 450 cd/m² |
| Viewing Angle | 160° horizontal / 140° vertical |
| Touchscreen | Resistive |
| Touch Rating | 1 million finger-touch operations |
| Processor | Intel Atom |
| RAM | 1 GB DDR2 |
| Application Memory | 2 GB NAND flash |
| Ethernet | 1 × 10/100/1000 Base-T, shielded RJ45 |
| USB | 3 × USB 2.0 host ports, maximum 500 mA output each |
| Serial Interfaces | Two combined serial ports supporting RS-232 and RS-422/485 |
| External Storage | Optional standard SD card, up to 2 GB |
| Power Supply | 24 V DC nominal; 18–32 V DC |
| Power Consumption | 24 W |
| Front Protection | IP65 |
| Rear Protection | IP20 |
| Overall Dimensions | 410 × 286 × 83 mm |
| Panel Cutout | 394 × 270 mm |
| Mounting Depth | 76 mm; 176 mm including clearance |
| Weight | 3.85 kg |
| Operating Temperature | −10°C to +50°C |
| Storage Temperature | −20°C to +70°C |
| Operating Humidity | 5–85%, non-condensing |
| Configuration Software | Panel Builder 800 Version 6 |
| UL Approval | UL 508 |
Specifications are based on ABB’s PP885 hardware and installation manual.
PP885 3BSE069276R1
Related Products
- ABB PP882 — 3BSE069275R1: Smaller high-performance Panel 800 Version 6 HMI with a 12.1-inch display.
- ABB PP885M — 3BSE069280R1: Black 15.4-inch touch panel variant.
- ABB PP885H — 3BSE069281R1: Black 15.4-inch high-brightness touch panel variant.
- ABB PP874 — 3BSE069271R1: 7-inch Panel 800 Version 6 touch panel.
- ABB PP877 — 3BSE069272R1: 10.4-inch Panel 800 Version 6 touch panel.
- ABB RX885/893 Touch Cover — 3BSE069292R1: Protective accessory listed for compatible /893 panels.
- ABB CB810 — 3BSE042255R1: USB-to-Ethernet adapter for programming, listed in the Panel 800 accessory documentation.
These products belong to the broader Panel 800 ecosystem, but screen size, enclosure design, brightness, and project compatibility differ. Do not treat them as direct replacements without checking the application and installation requirements.
Frequently Asked Questions
Q1: What is the ABB 3BSE069276R1 used for?
It is an industrial HMI operator panel used to display process information and provide operator interaction with compatible automation controllers.
Q2: Which software is required to configure the ?
ABB specifies Panel Builder 800 Version 6. Check the installed software version and project files before replacing a panel, especially when supporting an older running system.
Q3: What power supply does the require?
The specified supply is 24 V DC nominal, with an allowable range of 18–32 V DC. Power consumption is approximately 24 W. Confirm supply polarity and grounding before energizing the panel.
Q4: Does the support Ethernet and serial communication?
Yes. It has one Gigabit Ethernet port and serial interfaces supporting RS-232 and RS-422/485. The communication protocol and controller compatibility depend on the driver and application configuration.
Q5: Is the waterproof?
The front panel is rated IP65, but the rear is rated IP20. The complete installation must protect the rear of the unit from dust and moisture as required by the application. IP65 front protection does not mean the entire panel can be immersed or installed without suitable enclosure protection.
Q6: Can I replace a failed with a PP885M or PP885H?
Not without checking the exact hardware variant, project compatibility, and installation requirements. Although these models share the Panel 800 family, their specifications and intended configurations differ.
Q7: What should I check when purchasing a used ?
Request confirmation of the full article number and hardware label. Ask for a powered-on test showing the complete display, touch response across the screen, Ethernet connectivity, serial interfaces, and stable operation. Also check for LCD discoloration, backlight deterioration, damaged connectors, and battery condition. Confirm that the original application project is available; a functioning replacement panel without a compatible project may not restore the operator station.
