Description
Technical Specifications
| Parameter | Details |
|---|---|
| Product model | PFTL101A-2.0KN |
| Order number | 3BSE004172R1 |
| Manufacturer | ABB |
| Product family | Pressductor PFTL 101 |
| Product type | Pillow block load cell |
| Rated measuring load | 2.0 kN |
| Measuring direction | Horizontal |
| Accuracy class | 0.5% |
| Repeatability error | Less than ±0.05% |
| Deflection at nominal load | 0.015 mm |
| Overload capacity in measuring direction | 500% of nominal load, per the PFTL101 family data |
| Electrical connection | Select the compatible cable and connector arrangement |
| Operating temperature | Verify the exact limit in the applicable installation manual |
| Protection rating | Do not assume IP66/IP67 for the standard A variant; those ratings are specified for particular AE/AER variants |
| Product weight | ABB listing reports 10.5 kg; verify whether this is the relevant shipping or product-weight field |
Major Features and Advantages
Horizontal force measurement
The PFTL101A-2.0KN 3BSE004172R1 measures force in the horizontal direction. This is useful in web-tension applications where the tension component needs to be measured separately from the weight of a heavy roller. Correct alignment and mounting are essential; the load cell should not be selected solely by comparing nominal load ratings.
Pressductor sensing technology
ABB’s Pressductor technology uses the magnetoelastic effect: mechanical force changes the magnetic properties of the sensing element, producing a measurement signal. ABB describes this technology as suitable for industrial tension measurement, including applications subject to electrical interference.
PFTL101A-2.0KN 3BSE004172R1
Defined load rating
The 2.0 kN nominal capacity gives engineers a clear starting point for sizing the sensor. ABB’s PFTL101 family data also specifies a 0.5% accuracy class and a repeatability error below ±0.05%. These are family-level published specifications; confirm the relevant datasheet revision and installation conditions for the exact unit.
Standard and specialized variants
The PFTL101 family includes standard A/B versions, mill-duty AE/BE versions, and acid-resistant AER/BER versions. These variants differ in their intended environments and connection arrangements. A standard PFTL101A-2.0KN should not be treated as interchangeable with an AE or AER version without checking the complete order number and mechanical installation.
Typical Applications
- Paper machines and web-processing lines
- Calenders and coating equipment
- Winding and rewinding machines
- Industrial tension measurement on roller assemblies
- Maintenance of existing ABB Pressductor force-measurement systems
These applications are consistent with ABB’s stated use of the PFTL101 family.
Installation and Maintenance
- Verify the complete model and order number against the installed sensor label.
- Confirm the force direction, nominal load, mounting geometry, and permitted transverse load in the equipment documentation.
- Inspect the mechanical mounting surfaces and roller alignment before installing the replacement.
- Use the specified cable and connector. ABB lists compatible cable options, including 15 m, 30 m, and 50 m versions; check the required part number for the actual installation.
- After installation, check signal stability and verify the measurement against the approved commissioning or calibration procedure.
- Investigate mechanical binding, incorrect alignment, damaged cabling, and signal-conditioning faults before concluding that the sensor itself has failed.
Product Assurance and Procurement Notes
For an ABB PFTL101A-2.0KN 3BSE004172R1 purchase, request a clear photograph of the nameplate, confirmation of the complete order number, and a statement of the unit’s actual condition. If the seller describes the unit as tested, ask for the test scope and results. Stock status, origin, warranty, and calibration history should be confirmed for the specific unit rather than inferred from the model designation.
Procurement recommendation: Match the 2.0 kN rating, horizontal measurement direction, exact A variant, mechanical mounting, and cable configuration before ordering. Do not substitute the AE, AER, or B variants based only on their similar appearance or nominal load rating.
