Description
Product Overview
The ABB ICSE08B5 FPR3346501R1012 is identified in ABB product documentation as the ICSE08B5-2 I/O module, with the type designation ICSE 08 B5*24V. It belongs to ABB’s legacy AC31 and earlier I/O product range, making accurate model identification important when maintaining an existing control installation. ABB lists the unit with a net weight of 0.28 kg and dimensions of 125 mm deep, 80 mm high, and 104 mm wide. These manufacturer-listed details provide a useful starting point for confirming the physical fit and matching the replacement part to the installed equipment.
For maintenance and procurement, the complete order number FPR3346501R1012 should be treated as the primary identifier, rather than relying on the shortened ICSE08B5 model name alone. ABB’s documentation separately lists ICSE08B5, order number FPR3346501R0016, as an analog input module with a TCAD designation. That is a different order number from the requested R1012 variant. The distinction matters: reseller pages sometimes describe the R1012 unit as an analog input or analog I/O module, but the available ABB entry for R1012 identifies it more generally as an I/O module. Confirm the actual I/O function and terminal assignment against the equipment documentation before installation.
Product Introduction
The ICSE08B5-2 is relevant to maintenance work on legacy ABB automation equipment where the original hardware configuration must be preserved. When sourcing this part, compare the existing module’s nameplate, order number, connector arrangement, and system documentation. A similar model name or matching enclosure dimensions do not establish electrical or functional interchangeability.
Before replacing a failed module, record the existing wiring and configuration, verify the supply requirements, and check the controller’s hardware documentation for the correct module position and supported configuration. If the application depends on analog signal measurement, do not assume that this R1012 version has the same input characteristics as the separately listed R0016 analog input module. Resolve that distinction before reconnecting field signals or returning the equipment to service.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Product model | ICSE08B5-2 |
| Common model designation | |
| Order number | FPR3346501R1012 |
| Product type | I/O module |
| ABB type designation | ICSE 08 B5*24V |
| Voltage designation | 24 VDC |
| Dimensions (D × H × W) | 125 × 80 × 104 mm |
| Net weight | 0.28 kg |
| Input channel count | Not verified for this order number |
| Output channel count | Not verified for this order number |
| Signal types and resolution | Not verified for this order number |
| Communication interface | Not verified |
| Operating temperature | Not verified |
| Protection rating | Not verified |
| Installation method | Confirm from the applicable AC31 hardware documentation |
Source note: ABB’s product entry confirms the model designation, order number, 24 VDC designation, dimensions, and weight. Detailed channel and electrical specifications are intentionally left unconfirmed rather than borrowed from another variant.
- FPR3346501R1012
Related Products
The following parts are useful for identification or system-level investigation, but they are not automatic substitutes for FPR3346501R1012.
- ABB — FPR3346501R0016: Listed separately by ABB as an analog input module with a TCAD 24V designation. Confirm functional requirements before considering it as an alternative.
- ABB ICSI08D1 — FPR3315101R1012: A separately identified ABB I/O module in the same legacy product documentation. Similarity of the order-number suffix does not imply interchangeability.
- ABB ICSO08R1 — FPR3312101R0026: Another separately identified module in the legacy AC31 product range; verify its function and the host-system requirements before selection.
Frequently Asked Questions
Q1: What is the ABB FPR3346501R1012?
ABB identifies this order number as the -2 I/O module, designated for a 24 VDC version.
Q2: Is an analog input module?
That function is not conclusively established by the available ABB entry for this exact order number. ABB lists FPR3346501R0016 separately as an analog input module, so the two order numbers should not be treated as equivalent without documentation confirming compatibility.
Q3: What are the module’s dimensions and weight?
ABB lists dimensions of 125 × 80 × 104 mm (depth × height × width) and a net weight of 0.28 kg.
Q4: Can it replace another module?
Not based on the shortened model name alone. Compare the complete order number and the required I/O function, then verify the replacement against the original system documentation.
Q5: Which technical specifications should be confirmed before ordering?
Confirm the exact part number, channel function, signal types, supply requirements, terminal layout, and supported controller configuration. Operating temperature and protection rating should also be checked if required by the installation.
Q6: What should be checked when receiving a replacement?
Inspect the nameplate and order number, check for shipping or connector damage, and request available inspection or functional-test records. For a used or refurbished unit, ask for the condition and test scope in writing; a visual inspection alone does not establish functional performance.
Q7: Is this module suitable for a new control-system design?
Its documented association with ABB’s legacy AC31 product range makes it more directly relevant to maintaining existing equipment. Suitability for a new design requires a documented compatibility assessment and confirmation of long-term support requirements.
Procurement Recommendation
For a replacement purchase, specify ABB -2, in the inquiry and request a clear photograph of the actual nameplate before shipment. Confirm that the supplier is quoting the R1012 order number—not the separately documented R0016 analog input variant.
Ask for the module’s condition, available test evidence, warranty terms, and return provisions to be documented in the quotation. If the unit will be installed in a running process, verify the wiring and I/O configuration against the site documentation before energizing the replacement. The key procurement risk is not the module’s physical size; it is receiving a part with a similar designation but a different functional specification.
