Description
ABB 3BHE024360R0001 KY A935 A01 — Product Page
Product Overview
The ABB 3BHE024360R0001 KY A935 A01 is an identifiable ABB power-electronics component associated with the IC158_REV05 assembly designation. Available parts records connect this part number with converter equipment, while a separate spare-parts catalog lists it among ABB components used in Bordline CC1500MS equipment. These references establish a useful identification trail, but they do not fully establish the board’s electrical topology, connector assignment, or precise function within every supported equipment configuration. Those details should be checked against the original bill of materials and assembly documentation before procurement.
In a power-conversion system, the correct replacement assembly must match more than its external part number. Input voltage, output characteristics, load requirements, connector pinout, mounting arrangement, and revision compatibility all affect whether a replacement can operate safely. For ABB 3BHE024360R0001, the IC158_REV05 marking is therefore important when comparing a removed unit with proposed replacement stock. Do not assume that a visually similar ABB converter board has the same electrical behavior or control interface. The KY A935 A01 marking should also be recorded during incoming inspection, particularly when the installed unit carries multiple identification labels.
For maintenance teams, ABB 3BHE024360R0001 KY A935 A01 may be relevant to a planned repair, spare-parts replenishment program, or restoration of equipment that cannot tolerate an extended outage. Before installation, compare the complete assembly number, revision, connector layout, and available test documentation. If the component is being sourced for a Bordline CC1500MS installation, verify that association against the specific equipment configuration rather than relying solely on a catalog listing. This approach reduces the risk of installing an electrically incompatible spare and makes the procurement decision traceable to the actual equipment requirement.
Product Introduction (Non-Templated)
A converter fault can leave maintenance personnel choosing between repairing the installed assembly and sourcing a complete replacement. The ABB 3BHE024360R0001, identified as IC158_REV05, is a candidate for investigation when this part number appears in the equipment BOM.
The practical acceptance criteria are straightforward: confirm the exact part and revision, verify electrical ratings from controlled documentation, and obtain evidence of functional testing. No verified efficiency, output-current rating, or guaranteed interchangeability figure should be assumed from the part number alone.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Part Number | 3BHE024360R0001 |
| Additional Marking | KY A935 A01 |
| Assembly Designation | IC158_REV05 |
| Product Classification | Power-conversion assembly; precise function requires confirmation |
| Equipment Association | Converter equipment; also listed in a Bordline CC1500MS spare-parts catalog |
| Input Voltage | A 48 VAC configuration is mentioned in secondary product references; verify against the unit label and applicable documentation |
| Output Voltage | Not independently verified |
| Output Current / Power Rating | Not independently verified |
| Electrical Interfaces | Not independently verified |
| Communication Protocol | Not established from available identification records |
| Installation Method | Confirm the original equipment mounting and connector arrangement |
| Operating Temperature | Not independently verified |
| Protection Rating | Not independently verified |
| Firmware / Revision Requirements | Confirm the installed system’s approved hardware and revision requirements |
| Condition | Must be confirmed for the specific supplied unit |
3BHE024360R0001 KY A935 A01
Related Products
The following ABB part numbers appear in broader power-electronics or converter spare-parts records. They are comparison and sourcing references only, not confirmed direct replacements for 3BHE024360R0001.
- 3BHE018260R0001 — Listed as an ABB H5H176_REV07 DC-DC converter. Consider only when identifying a separately specified conversion stage.
- 3BHE031705R0001 — Associated with an IC195_REV02 DC-DC converter designation. Verify its role and ratings independently.
- 3BHE031705R0002 — Listed as an IC266_4_REV00 DC-DC converter. The different assembly designation means interchangeability cannot be presumed.
- 3BHE044684R0001 — Associated with an IC263_2_REV02 DC-DC converter designation. Useful as a separate converter identification reference.
- 3BHE036290R0001 — Listed as a BCC12323.4 gate-drive unit assembly. This is a different functional designation and should not be treated as a converter substitute.
- 3BHE030484R0001 — Identified in parts records as an XV D668C01 support gate-drive printed-board assembly. Relevant to gate-drive spare-parts research, not a verified equivalent.
- 3BHE020121R0001 — Listed as a Bordline CC1500MS input assembly. It may be relevant when reviewing the wider equipment BOM, but it serves a different stated function.
- 3BHE020120R0001 — Listed as a Bordline CC1500MS bank assembly. Confirm the exact assembly designation and equipment revision before ordering.
Frequently Asked Questions
Q1. What is ABB 3BHE024360R0001 KY A935 A01?
It is an ABB power-electronics component identified with the IC158_REV05 designation and associated with converter equipment in available records. The precise circuit function should be established from the original equipment documentation before installation.
Q2. Is this component compatible with Bordline CC1500MS equipment?
A spare-parts catalog lists the part among components associated with Bordline equipment. That is a useful lead, not a universal compatibility guarantee. Confirm the specific vehicle or equipment variant, BOM reference, and assembly revision.
Q3. Does it operate from a 48 VAC supply?
Secondary references mention a 48 VAC configuration, but the complete input range and operating conditions have not been independently verified. Check the nameplate and approved technical documentation before energizing the assembly.
Q4. Can I hot-swap this component while the equipment is running?
Do not assume hot-swap capability. Unless the equipment service manual explicitly authorizes live replacement, isolate the relevant power sources, follow the site’s lockout/tagout procedure, and observe the manufacturer’s discharge and handling requirements.
Q5. Can I replace it with another ABB converter that has similar ratings?
Not on ratings alone. Connector pinout, control signals, conversion topology, mounting, revision, and system-level protection behavior must also match. A similar voltage rating or physical appearance does not establish functional equivalence.
Q6. How can I verify that a supplied unit is genuine and correctly identified?
Request clear photographs of all labels, the complete part number, the KY A01 marking, the IC158_REV05 designation, and any revision or serial information. Compare these details with the removed unit and procurement documentation. For used or surplus stock, request the available inspection and functional-test records; visual condition alone is insufficient.
Q7. What should I confirm before placing an order?
Provide the supplier with the complete part number and all secondary markings. Confirm the equipment model, the required revision, the actual stock condition, the return terms, and the available test evidence. If the unit is critical to a production or transportation system, obtain engineering approval before treating it as a direct replacement.
