Description
Product Overview
The ABB 3BHE006720R6001 is listed in third-party component inventories as a terminal block associated with ABB Entrelec, with the item number 0115 124.07 appearing alongside the part number in one listing. This identification differs from the supplied description of “UNITROL 1000.” ABB’s UNITROL 1000 family is an automatic voltage regulator platform for synchronous generators and motors, whereas the listed component category for 3BHE006720R6001 is a terminal block. The available evidence does not establish that this part number identifies an excitation controller or a complete UNITROL 1000 device.
For industrial maintenance and procurement, this distinction matters. A terminal block is generally used to provide an electrical connection point within a control panel, equipment assembly, or wiring system. Its suitability depends on electrical ratings, conductor size, terminal geometry, mounting arrangement, insulation requirements, and the wiring design of the target equipment. Those details cannot safely be inferred from the part number alone. The associated item number is a useful cross-reference, but it should not replace verification against an original drawing, bill of materials, or manufacturer documentation.
Before purchasing the ABB 3BHE006720R6001, compare the complete marking on the installed component with the requested part number. Request clear label photographs and dimensional details, and confirm whether the supplier is providing the exact component or a proposed substitute. If the intended requirement is a UNITROL 1000 excitation regulator, obtain the regulator’s actual nameplate model and complete ABB type designation instead. The correct identification should be established before compatibility, installation, or replacement claims are made.
Product Introduction
The ABB 3BHE006720R6001 is identified in available component listings as a terminal block. Its precise electrical ratings and intended assembly remain unverified, so the part should be matched against the installed component and engineering documentation before use.
If your application specifically requires a UNITROL 1000 AVR, confirm the controller model separately. ABB describes UNITROL 1000 as an excitation-control family for synchronous machines, but that does not establish that this terminal-block part number belongs to the regulator itself.
Key Technical Specifications
| Parameter | Available information |
|---|---|
| Manufacturer / listing brand | ABB / ABB Entrelec |
| Part number | 3BHE006720R6001 |
| Listed product type | Terminal block |
| Associated item number | 0115 124.07, as reported by one listing |
| Intended application | Not confirmed |
| Rated voltage | Not verified |
| Rated current | Not verified |
| Conductor size | Not verified |
| Terminal count and arrangement | Not verified |
| Mounting method | Not verified |
| Operating temperature | Not verified |
| Protection rating | Not verified |
| UNITROL 1000 compatibility | Not established |
| Condition | Must be confirmed for the specific unit |
Unitrol 1000-15 3BHE006720R0200
Related Products
The following part numbers appear in the same ABB component inventory. They are reference items only, not confirmed compatible replacements for 3BHE006720R6001.
- ABB 3BHE006412R0101 — Listed electrical component; exact function requires verification.
- ABB 3BHE014070R0101 — Listed ABB component; verify the product type and application.
- ABB 3BHE014557R0003 — Listed ABB component; not established as an interchangeable terminal block.
- ABB 3BHE016034R0024 — Listed ABB component; confirm the complete identification.
- ABB 3BHE021083R0101 — Listed component associated with a jumper bar in an inventory; verify the actual item.
- ABB 3BHE021481R0001 — Listed component associated with a fuse in an inventory; verify its electrical rating and function.
- ABB 3BHE022287R0001 — Listed ABB component; application not confirmed.
- ABB 3BHE022886R0001 — Listed ABB component; application not confirmed.
Frequently Asked Questions
1. Is 3BHE006720R6001 a UNITROL 1000 excitation controller?
The available component listing identifies it as a terminal block. I could not verify it as a UNITROL 1000 AVR. Check the original nameplate or equipment bill of materials before ordering.
2. Can I use this part as a direct replacement?
Only after confirming the part number, physical layout, electrical ratings, and intended assembly. Similar-looking terminal blocks are not necessarily interchangeable.
3. Can I hot-swap this?
Do not assume it can be removed under power. Isolate the relevant electrical circuits and follow the equipment manufacturer’s maintenance procedure before replacing a terminal block.
4. Does it require firmware or programming?
A standalone terminal block does not ordinarily require firmware. If the intended item is actually an electronic excitation controller, its firmware and configuration requirements must be checked against the correct controller model.
5. How can I verify a new-surplus component?
Request photographs of the part markings, packaging, and terminal arrangement, along with traceable sourcing and any inspection records. New-surplus status alone does not prove authenticity or electrical condition.
6. What information is needed to confirm compatibility?
Provide the complete part number, clear photographs, the equipment model, and the relevant wiring drawing or bill-of-materials entry. For a UNITROL 1000 application, include the actual AVR nameplate designation.
7. What warranty should I expect?
Warranty coverage depends on the supplier and the component’s condition. Obtain written confirmation of the warranty period, return terms, and any testing performed before shipment.
