Description
Product Overview
The ABB 3BHB028673R0010 is a phase module frame assembly associated with the ABB ACS2000 medium-voltage AC drive platform. ABB’s product data identifies the exact type designation as PBA F10 A01 : 6k200 and the catalog description as “PHASE MODULE FRAME 2 R0.” This distinction matters. It is not a PLC CPU, DCS I/O card, or standalone inverter; it is a substantial mechanical assembly within the ACS2000 power-conversion architecture, intended to accommodate the associated phase-module and power-electronic hardware.
At the equipment level, the ABB 3BHB028673R0010 is used as a spare-part assembly for drives. ABB’s published product information classifies it under spare parts and gives a product net weight of approximately 139 kg. A separate ABB-derived product record lists the invoice description as “PHASE MODULE FRAME 2 RO” and identifies the frame size as a spare-parts item. That weight is not a minor detail during maintenance: replacement planning requires proper lifting equipment, cabinet access, mechanical alignment, and verification of the complete power-stage arrangement.
For procurement, the critical point is to distinguish this frame from a complete populated phase module. The designation identifies the frame assembly, while the power semiconductor and associated electrical components installed within the frame determine the actual power-conversion configuration. Available ABB-derived catalog information states that replacement modules are mechanically identical with 3BHB028673R0010, but mechanical fit alone should not be treated as electrical approval. When replacing an installed assembly, verify the drive rating, existing phase-module configuration, revision, cabinet arrangement, and all associated power and control connections before releasing the spare for installation.
Product Introduction (Non-Templated)
A 139 kg replacement frame changes the maintenance equation immediately: this is a drive power-stage assembly, not a card-level spare. The ABB 3BHB028673R0010 is specified as PBA F10 A01: 6k200, Phase Module Frame 2 R0 for the platform.
For an legacy replacement, confirm the installed frame configuration and mechanical revision before ordering. The part is listed as an spare, but the complete power-module arrangement still determines installation compatibility.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABB |
| Product ID | 3BHB028673R0010 |
| ABB Type Designation | PBA F10 A01 : 6k200 |
| Product Type | Phase Module Frame |
| Catalog Description | PHASE MODULE FRAME 2 R0 |
| Drive Platform | |
| Voltage Class Designation | 6k200 |
| Frame Size | Spare Parts |
| Product Net Weight | Approx. 139 kg |
| Gross Weight | Approx. 92.6 kg in one ABB-derived logistics record; verify shipment configuration before transport planning |
| Primary Application | medium-voltage AC drive |
| Installation Role | Mechanical frame/support assembly for phase-module power hardware |
| Country/Territory of Origin | ABB data lists United States and Poland records |
| Minimum Order Quantity | 1 piece |
The 139 kg net weight comes from ABB-derived product data; the separate logistics record reports a gross weight of 92.6 kg, which is internally inconsistent with the net-weight figure. For lifting and freight planning, the physical unit should therefore be weighed or the shipping documentation confirmed rather than relying on the gross-weight field alone.
PBAE10A01 6k100 3BHB024711R0020
Related Products
- 3BHB028673R0010 — PBA F10 A01: 6k200 — The primary identification for this phase-module frame. It is the exact spare-part number addressed here and is associated with the drive family.
- PBA F10 A01: 6k200 — ABB type designation corresponding to 3BHB028673R0010. Use the complete type designation together with the product ID when checking legacy equipment records.
- — The associated medium-voltage AC drive platform. The frame should be evaluated as part of the drive’s complete power-stage assembly rather than as an independent electrical module.
- Phase Module Frame 2 R0 — The catalog description attached to 3BHB028673R0010. This wording is useful when searching older spare-parts lists where the PBA designation may not have been recorded.
- Phase Module Assemblies — Associated populated power-stage assemblies installed within the frame. Their electrical ratings and hardware configuration must be matched separately; the frame part number alone does not establish the rating of every installed power component.
- PBA-series power assemblies — Related ABB power-stage spare assemblies using the same broader PBA naming structure. Cross-referencing requires the complete ABB product ID and drive configuration, not just the first part of the designation.
Frequently Asked Questions
Is ABB 3BHB028673R0010 a complete phase module?
Not necessarily. The catalog description is specifically “PHASE MODULE FRAME 2 R0.”
That means procurement should not automatically interpret the part as a fully populated power-conversion module. Before ordering, compare:
- Existing cabinet assembly.
- Frame identification.
- Installed power-module hardware.
- voltage/rating configuration.
- Mechanical revision.
- Required auxiliary components.
This distinction can prevent a very expensive mismatch.
Is 6k200 used in an ABB ?
Yes. Product documentation identifies 3BHB028673R0010 as an spare part, with the type designation PBA F10 A01: 6k200.
The important qualification is that “used in ” does not mean every cabinet accepts the assembly without further verification. Drive rating, cabinet arrangement, revision, and installed power hardware must match.
Can I hot-swap this phase-module frame?
No. This is a large mechanical assembly associated with a medium-voltage drive power stage, not a hot-swappable control card.
A replacement procedure should include electrical isolation, verification of the de-energized state, appropriate discharge/grounding procedures, mechanical lifting, and post-installation inspection. The documented 139 kg net weight also makes controlled lifting a practical requirement.
Does the 6k200 designation mean the frame itself handles 6.2 kV?
The 6k200 designation is ABB’s type designation for the assembly; it should not be interpreted as a standalone statement that every exposed part of the frame carries 6.2 kV.
The frame is a mechanical component within the power-conversion assembly. Actual electrical ratings depend on the complete populated phase-module configuration and drive design.
Are replacement modules mechanically identical to 3BHB028673R0010?
Available ABB-derived catalog information states that replacement modules are mechanically identical with 3BHB028673R0010.
That statement addresses mechanical interchangeability. It does not eliminate the need to verify electrical configuration, installed power hardware, revision, and the specific cabinet before commissioning.
Will replacing the frame affect my PLC or DCS logic?
The frame is part of the drive hardware, not the plant PLC/DCS controller program. Replacing the mechanical assembly therefore does not inherently erase PLC or DCS logic.
The commissioning risk is elsewhere: incorrect assembly, power-stage mismatch, damaged connections, or an incompatible configuration can prevent the drive from returning to service. Preserve the existing drive parameters and maintenance records before beginning the replacement.
How should I verify a New Surplus 3BHB028673R0010?
For a critical medium-voltage spare, verify the 3BHB028673R0010 product ID and PBA F10 A01: 6k200 type designation against the physical identification label. Then inspect the frame for deformation, corrosion, damaged mounting points, connector damage, contamination, and evidence of previous installation.
Because the published net weight is approximately 139 kg, shipping and storage history also deserve attention. “New surplus” should describe the unit’s supply condition; it should not be used as a substitute for physical inspection and compatibility verification.
