Description
Key Technical Specifications
| Parameter | Available information |
|---|---|
| Manufacturer | Kollmorgen |
| Model | CB06561 |
| Drive designation | PRD-B040SSLZ-62 |
| Product category | Servo drive/controller |
| Power-stage supply | Not confirmed for this exact model |
| Auxiliary supply | Not confirmed |
| Rated output current | Not confirmed |
| Rated output power | Not confirmed |
| Motor feedback | Exact feedback type not confirmed |
| Command interface | Not confirmed |
| Communication protocol | Not confirmed |
| Operating temperature | Not confirmed for this exact model |
| Protection rating | Not confirmed |
| Mounting | Verify original installation and mechanical dimensions |
Technical reference note: Kollmorgen’s official Series 04S manual specifies a 3 × 43 VAC power-stage supply for documented 04S configurations, with a 24 VDC auxiliary supply option. Its environmental instructions specify 0 to +45°C under rated conditions, with derating above that range, and IP00 protection. These are Series 04S reference values, not verified ratings for CB06561.
Product Introduction
The Kollmorgen CB06561 PRD-B040SSLZ-62 is identified in secondary product records as a servo drive used in industrial motion-control equipment. A servo drive receives command signals from a motion controller, regulates motor current, and controls motor response according to the configured feedback and control arrangement. Typical machine-level applications include CNC equipment, automated machinery, and positioning systems.
CB06561 PRD-B040SSLZ-62
For a replacement project, the complete drive designation matters. Servo amplifiers with similar housings or current ratings can differ in motor feedback support, command inputs, power-stage design, and controller-ready or fault-output wiring. The original motor data and drive configuration should be checked before installing a replacement.
Application Scenarios and Field Pitfalls
Potential application areas include:
- CNC machine-tool axes and auxiliary motion systems.
- Industrial positioning and feed mechanisms.
- Automated production machinery.
- Servo-driven material handling equipment.
- Packaging and printing machinery.
Replacement checks
- Match the complete
PRD-B040SSLZ-62designation, not justCB06561. - Verify the AC power-stage supply and auxiliary voltage from the nameplate.
- Confirm the motor’s rated current, winding data, and feedback device.
- Check command-signal wiring and controller-ready interlocks.
- Inspect motor cable shielding, protective earth, and grounding arrangements.
- Confirm ventilation requirements and cabinet mounting orientation.
Kollmorgen’s Series 04S installation manual specifically warns against connecting or disconnecting the transistor controller while energized. It also identifies residual DC-link voltage after shutdown as a service hazard. Follow the applicable discharge and voltage-verification procedure before handling the drive.
Related Products and Variants
| Model | Identification |
|---|---|
| CB06560 / PRD-B040SAIB-62 | Separately listed Kollmorgen drive designation |
| CB06551 | Separate Kollmorgen part number; exact configuration must be checked |
| PRD-B040SSIB-63 | Related PRD designation; not established as a direct replacement |
These model relationships do not establish electrical or firmware interchangeability.
Procurement and Quality Control
For this legacy-style servo controller, procurement should be based on the original unit’s complete identification and electrical configuration.
Before accepting a replacement, request:
- Front and side nameplate photographs.
- Clear images of all terminal labels and connectors.
- Manufacturer part number and hardware revision.
- Power-on self-test or functional test report, where testing is available.
- Confirmation of the included connectors and accessories.
- Evidence that the unit matches the installed motor and feedback arrangement.
Important: I would not publish the commonly repeated 400 W, 200–230 VAC, or AKD-series specifications as confirmed facts for this part. The available sources do not establish those values reliably.
A photograph of the CB06561 nameplate and terminal layout would help confirm the exact Kollmorgen drive configuration.
