Description
Product Overview
The Applied Materials 0190-51414 is an equipment-specific part number associated in available product records with a Yaskawa SERVOPACK identified as SGDV-0CA05AY890AA. The SGDV family belongs to Yaskawa’s Σ-V servo-drive range, which is used for precision motor control in industrial machinery. In semiconductor manufacturing equipment, servo systems may control positioning axes and other mechanisms that require coordinated motion. The exact machine function of this Applied Materials part number should be confirmed from the installed assembly and equipment documentation.
The SGDV family includes multiple electrical ratings, motor interfaces, and command-interface configurations. Yaskawa’s documentation distinguishes models by supply voltage, current rating, and interface type, so specifications from a similar SGDV model cannot safely be applied to the complete 0190-51414 assembly without verification. The suffix and any equipment-specific modifications matter when matching the replacement to the original system.
For maintenance and procurement, the priority is to verify both identifiers: Applied Materials 0190-51414 and the Yaskawa model printed on the actual unit. Compare the nameplate, connector arrangement, supply requirements, motor and encoder connections, and machine-control interface before ordering. If the component is being replaced in an operating semiconductor tool, also confirm whether equipment-specific configuration or parameter restoration is required. A matching base-family designation alone is not sufficient evidence of drop-in compatibility.
Product Introduction (Non-Templated)
Motion-control faults in semiconductor equipment can originate in the drive, motor feedback circuit, power stage, or machine command interface. Identifying the complete Applied Materials 0190-51414 assembly and its Yaskawa model helps maintenance teams narrow the replacement requirements before disturbing the installed wiring.
Because the full configuration has not been independently verified, request a clear nameplate image and connector photographs before procurement. Confirm electrical ratings and configuration against the original unit rather than relying on a partial model-number match.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Applied Materials Part Number | 0190-51414 |
| Associated Manufacturer | Yaskawa |
| Associated Model | SGDV-0CA05AY890AA, as reported in available records |
| Product Family | Σ-V / SGDV SERVOPACK family |
| Product Type | Servo drive / SERVOPACK assembly, subject to nameplate confirmation |
| Primary Function | Servo motor control |
| Input Voltage | Verify from the exact unit nameplate |
| Rated Output Current | Not verified for this complete model code |
| Supported Motor | Confirm exact motor model and rating |
| Feedback Interface | Verify from the drive and motor documentation |
| Command Interface | Not verified for this exact configuration |
| Communication Protocol | Not verified for this exact configuration |
| Configuration / Software | Confirm compatible setup tools and parameter requirements |
| Mounting | Verify physical arrangement and enclosure requirements |
| Operating Temperature | Not verified for this exact model |
| Protection Rating | Not verified for this exact model |
| Condition | Confirm for the individual unit |
The Yaskawa SGDV family has several supply and interface variants. Do not use general family specifications as confirmed ratings for Applied Materials 0190-51414.
0190-51414
Related Products
The following references are relevant to identifying or evaluating the assembly; they are not confirmed direct substitutes.
- SGDV-0CA05AY890AA — Model associated with Applied Materials 0190-51414 in available records. Confirm the complete code on the actual unit.
- Yaskawa SGDV SERVOPACK — The broader Σ-V servo-drive family. Voltage, current, and interface specifications vary by model.
- Yaskawa SGDV-OCA05A — An SGDV command-option module designation documented separately from complete SERVOPACK models. Verify whether the installed assembly includes an option module.
- Yaskawa SGDV EtherCAT models — A related SGDV family branch with a specific communications interface; not a substitute unless the machine controller and hardware configuration support it.
Frequently Asked Questions
Q1: What is Applied Materials part 0190-51414?
Available product records associate it with a Yaskawa SGDV servo-drive assembly. Confirm the nameplate on the supplied unit to establish the exact model and equipment configuration.
Q2: Can I hot-swap this servo drive?
Do not assume hot-swapping is supported. Servo drives connect to hazardous power circuits and may control machinery capable of unexpected movement. Follow the equipment’s isolation and lockout procedures and the manufacturer’s installation instructions.
Q3: Does this support firmware v3.1?
Compatibility with firmware v3.1 has not been verified for this part number. Check the exact drive model, hardware revision, and applicable configuration software before changing firmware or transferring parameters.
Q4: Can I replace it with another Yaskawa SGDV drive?
Not based on the SGDV prefix alone. Match the supply rating, motor capacity, command interface, feedback arrangement, connectors, and equipment-specific configuration. Confirm the replacement against the original part number and machine documentation.
Q5: Will the replacement require parameter programming?
That depends on the installed configuration and whether the replacement retains the required settings. Determine whether the original parameters can be backed up and restored, and verify motor and feedback settings before enabling motion.
Q6: How can I confirm the unit’s condition?
Inspect the model and serial labels, connectors, terminals, and enclosure for damage. For used or repaired equipment, request documented testing appropriate to the drive and confirm that the unit has the correct configuration for the intended machine.
Q7: What should I provide when requesting a replacement quotation?
Provide the complete Applied Materials number, the full Yaskawa nameplate model, clear photographs of the connectors and labels, and the machine model or installed application. This helps distinguish equipment-specific variants that may look similar but have different electrical or interface requirements.
Procurement recommendation: Treat 0190-51414 as an equipment-specific identifier associated with a Yaskawa SGDV servo-drive assembly. Confirm the full nameplate model and electrical configuration before describing it as a verified drop-in replacement.
