Description
Key Technical Specifications
| Parameter | Available identification |
|---|---|
| Applied Materials Part Number | 0190-15384 |
| Associated Manufacturer | Delta Tau Data Systems |
| Assembly Numbers Reported | 603603-103; 603603-106 |
| Board Description | Main CompactPCI I/O board |
| System Association | PMAC / UMAC CompactPCI Turbo control system |
| Backplane Interface | CompactPCI |
| I/O Type | Digital input and output |
| Isolation | Optically isolated I/O reported for the ACC-11C configuration |
| Input Activation Range | 12–24 VDC reported for ACC-11C |
| I/O Count | Configuration-dependent; published listings conflict |
| Connector Pinout | Requires exact assembly documentation |
| Operating Temperature | Not verified from an OEM document |
| Power Requirements | Not verified from an OEM document |
Important configuration distinction: A listing for assembly 603603-103 describes a main cPCI board with I/O 00–47 and identifies it as a 48-point card. Another listing identifies 603603-106 as a PMAC ACC-11C 96-point I/O board, with either 32 inputs/16 outputs or 64 inputs/32 outputs depending on option. These descriptions should not be combined into one definitive specification for every 0190-15384 board.
0190-15384
Product Introduction
The Applied Materials 0190-15384 is associated with Delta Tau CompactPCI digital I/O hardware used in semiconductor equipment control systems. Its function is to provide isolated digital signal connections between the motion-control platform and external machine devices. The board is associated with the PMAC/UMAC CompactPCI Turbo architecture, where correct hardware configuration and system-level integration are essential.
The exact I/O arrangement cannot be established from the Applied Materials number alone. Assembly number, board revision, and installed option determine the applicable input/output configuration. Buyers should verify these details against the installed board rather than relying only on the 0190-15384 label.
Application Scenarios & Field Pitfalls
Typical applications
- Semiconductor equipment digital control: Interfaces machine-level discrete signals with an Applied Materials control platform.
- Equipment status monitoring: Receives discrete feedback from sensors, switches, and interlock circuits.
- Actuator and relay control: Provides digital output signals to compatible external control circuits.
- CompactPCI motion-control systems: Operates as part of a Delta Tau PMAC/UMAC-based control architecture.
Field checks before replacement
- Verify assembly number: Check whether the installed board is 603603-103, 603603-106, or another documented revision. Do not assume these assemblies have identical I/O assignments.
- Confirm input/output allocation: The reported 32-input/16-output and 64-input/32-output configurations are option-dependent. Confirm the actual board option and connector mapping.
- Check signal polarity and voltage: The ACC-11C listing describes sinking-only I/O. Confirm the field wiring and external circuit design before reconnecting signals.
- Inspect the CompactPCI interface: Check connector condition, backplane compatibility, slot assignment, and board seating.
- Preserve system configuration: Record the existing PMAC/UMAC configuration, I/O mapping, and machine interlock assignments before removing the original card.
- Validate interlocks after installation: Test every safety-related and equipment-permissive signal using the machine’s approved commissioning procedure. Do not assume a replacement board has inherited the original configuration.
Related Products and Components
The following references are associated with the same Delta Tau control architecture or the same Applied Materials equipment context. They are not confirmed drop-in replacements:
- 603603-103 – Main CompactPCI I/O assembly commonly associated with 0190-15384.
- 603603-106 – Delta Tau PMAC ACC-11C I/O assembly also listed against 0190-15384.
- ACC-11C – Delta Tau 96-point digital I/O board designation associated with the 603603-106 listing.
- 603625-102A – UMAC CompactPCI Turbo CPU assembly listed in an Applied Materials system configuration.
- 603611-101 – ACC-24C2A four-axis analog interface board listed in the same equipment configuration.
- 603617-101 – Mainframe distribution board reference found in the same system inventory.
Procurement and Replacement Notes
For an accurate replacement, request photographs of the complete PCB, assembly-number label, revision marking, connector layout, and any option identification. Compare the original and replacement boards at the assembly level, not just by the Applied Materials part number.
A suitable procurement inspection should verify:
- 0190-15384 identification and exact assembly number
- PCB revision and installed I/O option
- Connector condition and CompactPCI edge contacts
- Input/output channel mapping
- Functional testing of all populated I/O channels
- Compatibility with the installed Delta Tau PMAC/UMAC system
Procurement recommendation: Treat 0190-15384 as a board-family identification until the physical assembly number is confirmed. The available references do not establish one universal electrical specification or interchangeability across the reported 603603-103 and 603603-106 versions.
