Description
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Product model | AC7-00712-1113 |
| Manufacturer | Peritek |
| Product type | PMC graphics controller |
| Form factor | PMC, reported |
| Bus interface | PCI, reported |
| Graphics output | Analog RGB/VGA, reported |
| Video memory | Onboard frame buffer, reported |
| Maximum resolution | Not confirmed for this exact suffix |
| Supply voltage | Not confirmed |
| Operating temperature | Not confirmed |
| Host compatibility | Requires a compatible PMC carrier board |
| Connector arrangement | Must be verified against the exact board revision |
Important: Some secondary listings attribute specifications such as 1280 × 1024 or 1600 × 1200 resolution, 5 V supply, and extended operating-temperature options to the broader product description. I would not publish those as confirmed specifications for AC7-00712-1113 without an original Peritek datasheet.
Product Introduction
The Peritek AC7-00712-1113 belongs to the embedded graphics hardware category. PMC graphics controllers are installed on compatible host boards to provide display functionality in systems where graphics processing is handled separately from the main CPU. Typical host platforms include embedded VME and CompactPCI computers, although the precise carrier-board compatibility of this particular model requires confirmation.
AC7-00712-1113
For legacy industrial and specialized computing equipment, replacing a graphics mezzanine card involves more than matching the connector. The host PCI implementation, video signal routing, display timing, driver support, and firmware configuration must all be considered. The exact -1113 suffix should therefore be matched against the original installed board rather than treated as a cosmetic ordering detail.
Application Scenarios & Field Pitfalls
Potential application areas
- Embedded industrial computer display systems.
- Legacy operator and monitoring terminals.
- Specialized VME or CompactPCI computing platforms.
- Equipment requiring dedicated graphics hardware.
Engineering checks before replacement
- PMC compatibility: Verify the host carrier supports the correct PMC mechanical and electrical interface.
- Video routing: Determine whether the original system uses front-panel output or rear I/O through the carrier.
- PCI signaling: Confirm the carrier’s voltage keying and PCI electrical requirements.
- Driver compatibility: Check the existing operating system, graphics driver, and firmware configuration.
- Display synchronization: Verify resolution, refresh rate, sync format, and monitor requirements.
Related Products
| Model | Identification | Relationship |
|---|---|---|
| AC7-00712-1105 | Peritek Eclipse 3 graphics controller | Related graphics product; different suffix |
| Eclipse 3 / VFR-M | Peritek graphics controller family designation | Family-level reference |
The AC7-00712-1105 is documented as an Eclipse 3 PMC graphics controller, but it is not verified as a direct replacement for AC7-00712-1113.
Procurement and Quality Control
Before purchasing AC7-00712-1113, request:
- A clear photograph of the complete PCB identification label.
- PCB assembly number and revision.
- Front and rear connector photographs.
- Confirmation of video output routing.
- Host carrier-board compatibility information.
- Power-on, PCI enumeration, and actual display-output test results.
Procurement recommendation: Do not approve a substitution based only on the AC7-00712 prefix. The -1113 suffix and board revision should match the installed hardware. An original board photograph or its PCB assembly number would help establish the exact configuration.
