Description
Product Overview
The Cameron AAP3798102-00031 is an industrial control-system spare associated with Cameron compressor-control equipment. Available identification records describe it as a processor or logic module used in compressor automation applications. Such assemblies can be part of the control hardware responsible for executing configured logic, coordinating operating sequences, and interfacing with other control components. The precise division of these functions depends on the installed controller architecture, so the part number should be matched to the equipment bill of materials and the original module documentation before procurement.
Some product records list a 2 A digital output rated for 100–240 VAC. That rating should be treated as provisional until confirmed against the manufacturer’s specification for the exact assembly. It does not establish the module’s complete input/output configuration, processor capability, communication interfaces, or power requirements. The Cameron AAP3798102-00031 should therefore not be specified as a general-purpose PLC I/O module based solely on the available short descriptions. Confirm the hardware revision, connector arrangement, controller family, and intended installation position.
For maintenance teams supporting compressor packages, correct module identification is especially important because an incorrect control component can affect startup sequences, permissives, alarms, or other configured machine functions. Before replacing the Cameron AAP3798102-00031, compare the existing label and revision with the machine documentation, preserve approved configuration data where applicable, and establish whether the replacement requires parameter loading or controller-specific commissioning. After installation, qualified personnel should verify diagnostics, configured logic, connected outputs, and the required operating interlocks before returning the compressor to service.
Product Introduction (Non-Templated)
A control-module failure on a compressor package can affect more than the immediate fault indication; it may prevent startup or interrupt a configured operating sequence. The Cameron AAP3798102-00031 is identified in available records as a compressor-control processor or logic module, but its exact hardware role should be confirmed against the installed controller.
Do not approve a replacement based only on the model string. Confirm the nameplate, controller generation, output ratings where applicable, and configuration requirements before commissioning.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer / brand | Cameron |
| Model | AAP3798102-00031 |
| Product category | Compressor-control electronic module |
| Reported module type | Processor / logic module |
| System association | Cameron compressor-control equipment; Maestro association requires confirmation for the specific installation |
| Reported digital output rating | 2 A, 100–240 VAC; verify against the unit-specific documentation |
| Input channels | Not independently verified |
| Output configuration | Not fully verified |
| Communication protocol | Not independently verified |
| Power supply requirements | Confirm from the applicable technical specification |
| Firmware / software compatibility | Confirm against the installed controller and system revision |
| Mounting and connectors | Verify against the original assembly |
| Operating temperature | Not independently verified |
| Protection rating | Not independently verified |
| Lifecycle status | Listed as discontinued in product records |
| Condition | Confirm for the individual unit |
Specification caution: The output rating and precise module classification are based on secondary product records, not a verified manufacturer datasheet for this exact part number. Obtain the original technical documentation before using these values for electrical design or replacement approval.
AAP3798102-00031
Related Products
These part numbers appear in the broader Cameron / Cooper Compression Maestro control-system context. They should not be assumed to be interchangeable with AAP3798102-00031.
- AAP3798102-00131 — Listed in compressor-control spare-parts documentation as a Maestro Universal I/O module. Its stated function differs from the processor/logic classification associated with .
- AAP3798102-00140 — Listed in the same spare-parts documentation as a Maestro Universal controller with a 10-inch graphic display. It is a different controller component.
- — The target part itself; confirm its exact function and revision before cross-referencing alternative assemblies.
For other potential replacements, use the compressor package’s approved parts list and wiring diagrams. A shared manufacturer or similar part-number prefix does not establish electrical or functional compatibility.
Frequently Asked Questions
1. What does the Cameron do?
Available records identify it as a processor or logic module associated with compressor-control equipment. Its exact function within the installed system must be confirmed from the machine documentation and physical module markings.
2. Is this module part of the Maestro Universal compressor control system?
Some product records associate the part number with the Maestro Universal system. Confirm the installed controller family and the module’s role in the original bill of materials before ordering.
3. Does the have a 2 A, 100–240 VAC digital output?
That rating appears in available product descriptions, but a manufacturer datasheet confirming it for the exact assembly has not been established here. Verify the nameplate and applicable technical documentation before connecting a load or approving an electrical substitute.
4. Can I hot-swap this module while the compressor is operating?
Do not assume live replacement is permitted. The module may participate in control logic or connected output functions. Follow the compressor manufacturer’s maintenance instructions and site isolation procedures, and place the equipment in the required safe state before removal or installation.
5. Does the support firmware v3.1?
A specific firmware-v3.1 compatibility claim could not be verified for this part number. Check the controller model, software release, module revision, and configuration requirements in the applicable documentation.
6. How do I verify that a replacement is correct?
Compare the complete part number, label, revision, connector arrangement, and installed controller configuration. Confirm any electrical ratings against the original specification. If the module stores or executes configured logic, establish the approved backup, loading, and validation procedure before installation.
7. What should be checked after installation?
Qualified personnel should verify module diagnostics, configuration recognition, required I/O functions, alarms, interlocks, and the compressor’s approved startup sequence. If digital outputs are involved, confirm their ratings and connected loads against the original electrical drawings before energizing the circuit.
Procurement recommendation: Specify Cameron and request a clear photograph of the label, revision markings, and connectors. Confirm the exact compressor controller, module function, and electrical ratings before purchase. For discontinued control hardware, documented testing and a clear statement of condition are more useful than a generic claim of compatibility.
